Features- Single Voltage Read and Write Operations- 2.3-3.6V
- Serial Interface Architecture- SPI Compatible: Mode 0 and Mode 3
- High Speed Clock Frequency- 80 MHz (2.7-3.6V operation)- 50 MHz (2.3-2.7V operation)
- Superior Reliability- Endurance: 100,000 Cycles (typical)- Greater than 100 years Data Retention
- Low Power Consumption:- Active Read Current: 10 mA (typical)- Standby Current: 5 µA (typical)
- Flexible Erase Capability- Uniform 4 KByte sectors- Uniform 32 KByte overlay blocks- Uniform 64 KByte overlay blocks
- Fast Erase and Byte-Program:- Chip-Erase Time: 35 ms (typical)- Sector-/Block-Erase Time: 18 ms (typical)- Byte-Program Time: 7 µs (typical)
- Auto Address Increment (AAI) Programming- Decrease total chip programming time overByte-Program operations
- End-of-Write Detection- Software polling the BUSY bit in Status Register- Busy Status readout on SO pin in AAI Mode
- Hold Pin (HOLD#)- Suspends a serial sequence to the memorywithout deselecting the device
- Write Protection (WP#)- Enables/Disables the Lock-Down function ofthe status register
- Software Write Protection- Write protection through Block-Protection bitsin status register
- Temperature Range- Commercial: 0°C to +70°C
- Packages Available- 8-lead SOIC (150 mils)- 8-contact WSON (6mm x 5mm)- 8-contact USON (3mm x 2mm)
- All non-Pb (lead-free) devices are RoHS compliant
| Parameter|
Parameter Name
Value
| Value | |
Density
2 Mbit
|
2 Mbit
| |
Op. Volt Range (V)
2.3 to 3.6
|
2.3 to 3.6
| |
Max. Clock Freq.
80 MHz
|
80 MHz
| |
Temp Range (°C)
0°C to +70°C
|
0°C to +70°C
| |
Endurance
100,000
|
100,000
| |
Data Retention (Years)
100
|
100
| |
Bus Modes
SPI
|
SPI
|
|
