SST25WF020A
SST25WF020A is a member of the Serial Flash 25 Series family and feature a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. SPI serial flash memory is manufactured with proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. This Serial Flash significantly improve performance and reliability, while lowering power consumption. The device writes (Program or Erase) with a single power supply of 1.65-1.95V. The total energy consumed is a function of the applied voltage, current, and time of application. Since for any given voltage range, the SuperFlash technology uses less current to program and has a shorter erase time, the total energy consumed during any Erase or Program operation is less than alternative flash memory technologies. SST25WF020A is offered in 8-lead SOIC, 8-contact TDFN (5mm x 6mm) and 8-contact USON (2mm x 3mm) packages.
Features- Single Voltage Read and Write Operations - 1.65-1.95V
- Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3
- High Speed Clock Frequency - 40MHz
- Superior Reliability - Endurance: 100,000 Cycles - Greater than 20 years Data Retention
- Ultra-Low Power Consumption: - Active Read Current: 4 mA (typical) - Standby Current: 10 µA (typical) - Power-down Mode Standby Current: 4 µA (typical)
- Flexible Erase Capability - Uniform 4 KByte sectors - Uniform 64 KByte overlay blocks
- Page Program Mode - 256 Bytes/Page
- Fast Erase and Page-Program: - Chip-Erase Time: 300 ms (typical) - Sector-Erase Time: 40 ms (typical) - Block-Erase Time: 80 ms (typical) - Page-Program Time: 3 ms/ 256 bytes (typical)
- End-of-Write Detection - Software polling the BUSY bit in Status Register
- Hold Pin (HOLD#) - Suspend a serial sequence without deselecting the device
- Write Protection (WP#) - Enables/Disables the Lock-Down function of the status register
- Software Write Protection - Write protection through Block-Protection bits in status register
- Temperature Range - Industrial: -40°C to +85°C
- Packages Available - 8-lead SOIC (150 mils) - 8-contact USON (2mm x 3mm) - 8-contact TDFN-S (5mm x 6mm)
- All devices are RoHS compliant
| Parameter
Parameter Name
Value
| Value |
Density
2 Mbit
|
2 Mbit
|
Op. Volt Range (V)
1.65 to 1.95
|
1.65 to 1.95
|
Max. Clock Freq.
40 MHz
|
40 MHz
|
Page Size (bytes)
256
|
256
|
Temp Range (°C)
-40°C to +85°C
|
-40°C to +85°C
|
Endurance
100,000
|
100,000
|
Data Retention (Years)
20
|
20
|
Bus Modes
SPI
|
SPI
|
|
Documents
Ordering Information
Part Number | Leads | Package Type | Temp Range | Packing | 1+ | 26+ | 100+ | 1000+ | 5000+ |
---|
SST25WF020A-40I/MF | 8 | TDFN-S | -40C to +85C | TUBE | 0.88 | 0.85 | 0.81 | 0.77 | 0.73 |
SST25WF020A-40I/SN | 8 | SOIC | -40C to +85C | TUBE | 0.70 | 0.68 | 0.65 | 0.61 | 0.58 |
SST25WF020AT-40I/CS | 9 | WLCSP | -40C to +85C | T/R | 0.96 | 0.93 | 0.89 | 0.84 | 0.79 |
SST25WF020AT-40I/MF | 8 | TDFN-S | -40C to +85C | T/R | 0.94 | 0.91 | 0.87 | 0.82 | 0.78 |
SST25WF020AT-40I/NP | 8 | USON | -40C to +85C | T/R | 0.90 | 0.87 | 0.83 | 0.79 | 0.74 |
SST25WF020AT-40I/SN | 8 | SOIC | -40C to +85C | T/R | 0.76 | 0.73 | 0.70 | 0.67 | 0.63 |
Similar Devices
Product | Memory Size | Memory Speed | Package | Price5K |
---|
SST25LF020A | 2000K | 33 MHz | SOIC 150mil-8, TDFN-S-8 | $0.44 |
SST25PF020B | 2 Mbit | 80 MHz | SOIC 150mil-8, TDFN-S-8, USON-8 | $0.50 |
SST25VF020 | | 20 MHz | SOIC 150mil-8, TDFN-S-8 | $0.44 |
SST25VF020B | 2000K | 80 MHz | SOIC 150mil-8, TDFN-S-8, USON-8 | $0.42 |
SST25WF020A | 2 Mbit | 40 MHz | SOIC 150mil-8, TDFN-S-8, USON-8, WLCSP-9 | $0.58 |
RoHS Information
PartNumber | DeviceWeight | ShippingWeight | LeadCount | PackageType | PackageWidth | SolderComposition | JEDECIndicator | RoHS | ChinaEFUP |
---|
SST25WF020A-40I/SN | 0.078000 | 0.160000 | 8 | SOIC | .150In(3.90mm) | Matte Tin | e3 | | |
SST25WF020AT-40I/SN | 0.078000 | 0.230303 | 8 | SOIC | .150In(3.90mm) | Matte Tin | e3 | | |
SST25WF020A-40I/MF | 0.073800 | 0.163265 | 8 | TDFN-S | 6x5x0.8mm | Matte Tin | e3 | | |
SST25WF020AT-40I/MF | 0.073800 | 0.200000 | 8 | TDFN-S | 6x5x0.8mm | Matte Tin | e3 | | |
SST25WF020AT-40I/NP | 0.012500 | 0.031333 | 8 | USON | 2x3x0.6mm | Matte Tin | e3 | | |
SST25WF020AT-40I/CS | | 0.064667 | 9 | WLCSP | Varies | SAC | e1 | | |