USB4624

The Microchip USB4624 is a low-power, OEM configurable, MTT (Multi-Transaction Translator) USB 2.0 hub controller with 4 downstream ports and advanced features for embedded USB applications. The USB4624 is fully compliant with the USB 2.0 Specification, USB 2.0 Link Power Management Addendum, High-Speed Inter-Chip (HSIC) USB Electrical Specification Revision 1.0, and will attach to an upstream port as a Full-Speed hub or as a Full-/Hi-Speed hub. The 4-port hub supports Low-Speed, Full-Speed, and Hi-Speed (if operating as a Hi-Speed hub) downstream devices on all of the enabled downstream (non-HSIC) ports. HSIC ports support only Hi-Speed operation.

The USB4624 has been specifically optimized for embedded systems where high performance, and minimal BOM costs are critical design requirements. Standby mode power has been minimized and reference clock inputs can be aligned to the customer’s specific application. Flexible power rail options ease integration into energy efficient designs by allowing the USB4624 to be powered in a single-source (VBUS (5V), VBAT, 3.3V) or a dual-source (VBAT + 1.8, 3.3V + 1.8) configuration. Additionally, all required resistors on the USB ports are integrated into the hub, including all series termination and pull-up/pull-down resistors on the D+ and D– pins.

The USB4624 supports both upstream battery charger detection and downstream battery charging. The USB4624 integrated battery charger detection circuitry supports the USB-IF Battery Charging (BC1.2) detection method and most Apple devices. These circuits are used to detect the attachment and type of a USB charger and provide an interrupt output to indicate charger information is available to be read from the device’s status registers via the serial interface. The USB4624 provides the battery charging handshake and supports the following USB-IF BC1.2 charging profiles:

Features
  • Hub Controller IC with 4 downstream ports
  • High-Speed Inter-Chip (HSIC) support Upstream port selectable between HSIC or USB 2.0 2 downstream HSIC ports
  • Upstream port selectable between HSIC or USB 2.0
  • 2 downstream HSIC ports
  • USB-IF Battery Charger revision 1.2 support on up and downstream ports (DCP, CDP, SDP)
  • Battery charging support for Apple® devices
  • FlexConnect: Downstream port 1 able to swap with upstream port, allowing master capable devices to control other devices on the hub
  • USB to I2C™/SPI bridge endpoint support
  • USB Link Power Management (LPM) support
  • SUSPEND pin for remote wakeup indication to host
  • Start Of Frame (SOF) synchronized clock output pin
  • Vendor Specific Messaging (VSM) support
  • Enhanced OEM configuration options available through OTP or SMBus Slave Port
  • Flexible power rail support VBUS (5V) or VBAT only operation 3.3V only operation VBAT + 1.8V operation 3.3V + 1.8V operation
  • VBUS (5V) or VBAT only operation
  • 3.3V only operation
  • VBAT + 1.8V operation
  • 3.3V + 1.8V operation
  • 48-pin (7x7mm) SQFN, RoHS compliant package
  • LCD Monitors and TVs
  • Multi-function USB Peripherals
  • PC Motherboards
  • Set-top Boxes, DVD Players, DVR/PVR
  • Printers and Scanners
  • PC Media Drive Bay
  • Portable Hub Boxes
  • Mobile PC Docking
  • Embedded Systems
Parameter
Parameter Name Value Value
Upstream Port USB 2.0 or HSIC USB 2.0 or HSIC
USB Speed USB 2.0 USB 2.0
Downstream Ports 4 4
MGMT I/F I2C I2C
ROM I/F SPI SPI
Op Voltage (V) 3.3 3.3
MultiTRAK Tech Yes Yes
PortMap Yes Yes
PortSwap Yes Yes
PHYBoost Yes Yes
Temp. Range Min. -40 -40
Temp. Range Max. 85 85
Documents
USB4624 USB 2.0 HSIC Hi-Speed 4-Port Hub ControllerData Sheets05/05/2014531KB
AN 26.18 - Configuration Options for the USB253x / USB3x13 / USB46x4AppNote11/20/2015891KB
AN 26.19 - USB Battery Charging with the USB253x/USB46x4/USB3x13 Hub ControllersAppNote09/10/2014470KB
AN 26.2 - Implementation Guidelines for Microchip's USB 2.0 and USB 3.0 Hub DevicesAppNote08/11/20151203KB
AN1589 - USB253x/USB46x4/USB3x13 Embedded Testing ModesAppNote11/05/2013505KB
AN1602 - Introduction to HSICAppNote12/10/2013375KB
AN1700 - FlexConnect ApplicationsAppNote03/31/2015243KB
AN1940 - AN1940 USB to GPIO Bridging with Microchip USB 2.0 HubsAppNote03/03/2016231KB
AN1941 - AN1941 USB to I2C Bridging with Microchip USB 2.0 HubsAppNote03/03/2016302KB
AN1971 - AN1971 - USB to SPI Bridging with Microchip USB 2.0 HubsAppNote05/04/2016592KB
AN2001 - USB to UART Bridging with Microchip USB 2.0 HubsAppNote09/22/2015211KB
AN2083 - USB Commands for the USB253x/3x13/46x4 Hub Feature ControllerAppNote01/22/2016120KB
AN26.21 - USB Device Design ChecklistAppNote08/10/2015386KB
OBJ Hub Card ReaderSoftware Library06/26/2007
Protouch - USB Controller Hub Configuration ToolSoftware Library03/07/2013
USB2530 Windows SDKSoftware Library05/14/2014
EVB-USB4624BCUH-01 Evaluation Board Bill of MaterialsBOM11/24/201559KB
EVB-USB4624BCUH-01 Evaluation Board Schematic - OrCADCAD Resource11/24/20152182KB
EVB-USB4624BCUH-01 Evaluation Board Gerber FilesGerber Files02/01/20141199KB
EVB-USB4624BCUH-01 Evaluation Board Schematic - PDFSchematics11/24/201564KB
EVB-USB4624BCUH Evaluation Board User's GuideUser Guides11/07/20132274KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
USB4624-1051HN48QFN0C to +70CTRAY3.943.292.992.892.85
USB4624-1051HN-TR48QFN0C to +70CT/R4.013.343.042.932.90
USB4624-1070HN48QFN0C to +70CTRAY3.943.292.992.892.85
USB4624-1070HN-TR48QFN0C to +70CT/R4.013.343.042.932.90
USB4624-1080HN48QFN0C to +70CTRAY3.943.292.992.892.85
USB4624-1080HN-TR48QFN0C to +70CT/R4.013.343.042.932.90
USB4624-1081HN48QFN0C to +70CTRAY3.943.292.992.892.85
USB4624-1081HN-TR48QFN0C to +70CT/R4.013.343.042.932.90
USB4624I-1051HN48QFN-40C to +85CTRAY4.934.113.743.613.57
USB4624I-1051HN-TR48QFN-40C to +85CT/R5.104.173.793.663.62
USB4624I-1070HN48QFN-40C to +85CTRAY4.934.113.743.613.57
USB4624I-1070HN-TR48QFN-40C to +85CT/R5.104.173.793.663.62
USB4624I-1080HN48QFN-40C to +85CTRAY4.934.113.743.613.57
USB4624I-1080HN-TR48QFN-40C to +85CT/R5.014.173.793.663.62
USB4624I-1081HN48QFN-40C to +85CTRAY4.934.113.743.613.57
USB4624I-1081HN-TR48QFN-40C to +85CT/R5.014.173.793.663.62
相关开发工具
Similar Devices
ProductPrice5K
USB2412$1.31
USB2422$1.29
USB2502
USB2503A
USB2504$2.52
USB2507$4.04
USB2512B$1.09
USB2513B$1.41
USB2514B$1.45
USB2517$3.17
USB2524$3.02
USB2532$1.97
USB2533$2.56
USB2534$2.63
USB3503$1.80
USB3613$2.70
USB3803$1.80
USB3813$2.70
USB4604$2.89
USB4624$2.85
USB5434
USB5532B$3.54
USB5533B$3.71
USB5534B$4.17
USB5537$4.84
USB5537B$4.84
USB5734$4.17
USB5742$3.10
USB5744$3.75
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
USB4624-1080HN0.1479000.44471248VQFN7x7x1.0mmMatte Tine3
USB4624-1080HN-TR0.1479000.36666748VQFN7x7x1.0mmMatte Tine3
USB4624I-1080HN0.1479000.44471248VQFN7x7x1.0mmMatte Tine3
USB4624I-1080HN-TR0.1479000.36666748VQFN7x7x1.0mmMatte Tine3
USB4624-1070HN0.1479000.44471248VQFN7x7x1.0mmMatte Tine3
USB4624I-1070HN0.1479000.44471248VQFN7x7x1.0mmMatte Tine3
USB4624-1070HN-TR0.1479000.36666748VQFN7x7x1.0mmMatte Tine3
USB4624I-1070HN-TR0.1479000.36666748VQFN7x7x1.0mmMatte Tine3
USB4624-1081HN0.1479000.44471248VQFN7x7x1.0mmMatte Tine3
USB4624-1081HN-TR0.1479000.36666748VQFN7x7x1.0mmMatte Tine3
USB4624I-1081HN0.1479000.44471248VQFN7x7x1.0mmMatte Tine3
USB4624I-1081HN-TR0.1479000.36666748VQFN7x7x1.0mmMatte Tine3
USB4624-1051HN0.1479000.44471248VQFN7x7x1.0mmMatte Tine3
USB4624-1051HN-TR0.1479000.36666748VQFN7x7x1.0mmMatte Tine3
USB4624I-1051HN0.1479000.44471248VQFN7x7x1.0mmMatte Tine3
USB4624I-1051HN-TR0.1479000.36666748VQFN7x7x1.0mmMatte Tine3
USB4624 USB 2.0 HSIC Hi-Speed 4-Port Hub Controller USB4624
AN 26.18 USB84604
AN 26.19 USB84604
AN 26.2 USB4640
AN1589 USB84604
AN1602 USB4640
AN1700 USB4624
AN1940 USB4624
AN1941 USB84604
AN1971 USB4624
AN2001 USB4624
AN2083 USB84604
AN26.21 USB3751A-2
EVB-USB4624BCUH-01 Evaluation Board Gerber Files - EVB-USB4624BCUH-01 Evaluation Board Gerber Files EVB-USB4624BCUH
EVB-USB4624BCUH-01 Evaluation Board Schematic - PDF EVB-USB4624BCUH
EVB-USB4624BCUH Evaluation Board User's Guide EVB-USB4624BCUH