USB5744
Microchip’s USB5744 Smart hub is a 4 port, SuperSpeed (SS)/Hi-Speed (HS), low power, low pin count configurable and fully compliant with the USB 3.1 Gen 1 specification. The USB5744 also supports Full Speed (FS) and Low Speed (LS) USB signaling, offering complete coverage of all defined USB operating speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0 controller, so 5 Gbps SuperSpeed data transfers are not affected by slower USB 2.0 traffic.
The USB5744 is in a 0.4mm pitch, 56 pin QFN. It's the smallest 4 port USB 3.1 Gen 1 hub in the industry. Functionality was reduced to optimize pin count and provide a cost effective solution.
Smart Hubs are defined as a USB hub that integrates system levels functions typically associated with a separate MCU or processor. Microchip’s USB5744 Smart Hub support custom configurations of external ports and GPIO pins. ProTouch2, Microchip’s proprietary software utility, can be used to program On-chip One Time Programmable (OTP) ROM which stores required register settings to ensure the desired start up configuration at power on. All port control signal pins and GPIOs are under firmware control, allowing for maximum operational flexibility. However, for even more simplicity, the USB5744 can be configured through a series of external low-cost resistor bootstraps. No OTP programming required..
Features- Four downstream USB3.1 Gen1/2.0 ports
- 56pin (7 x 7 mm) 0.4mm ptich, SQFN lead-free, RoHS compliant package
- Battery Charging: USB-IF revision 1.2 support on downstream ports (DCP, CDP, SDP)
Simultaneous data transfer for 2500 mA of High Speed charging
Enables charging from a mobile platform that is powered-off
- Simultaneous data transfer for 2500 mA of High Speed charging
- Enables charging from a mobile platform that is powered-off
- Integrated Hub Feature Controller (HFC) enabling port and GPIO configuration through OTP
- Port Config Straps: Predefined configuration of port settings – Battery Charging, Non-Removable, Disable
- ProTouch2: Configuration tool to enable enhanced OEM configuration options through either One-Time Programmable (OTP) (8Kbit) or external SPI ROM
- Manufacturing line programming tool and field update capabilities
- USB Link Power Management (LPM) support
- IETF RFC 4122 compliant 128-bit UUID
- Compatible with Microsoft® Windows® 8/8.1 and other major OS’s
- Industrial grade temperature support (-40°C to +85°C)
- Automotive quality and PPAP support
- Expansion Hubs
- Docking Stations
- LCD Monitors
- HDTVs
| Parameter|
Parameter Name
Value
| Value | |
Upstream Port
USB 3.1 Gen 1
|
USB 3.1 Gen 1
| |
USB Speed
USB 3.1 Gen 1
|
USB 3.1 Gen 1
| |
Downstream Ports
4
|
4
| |
ROM I/F
SPI
|
SPI
| |
Op Voltage (V)
3.3
|
3.3
| |
MultiTRAK Tech
Yes
|
Yes
| |
PortMap
Yes
|
Yes
| |
PortSwap
Yes
|
Yes
| |
TrueSpeed
Yes
|
Yes
| |
PHYBoost
Yes
|
Yes
| |
Temp. Range Min.
-40
|
-40
| |
Temp. Range Max.
85
|
85
|
|
Documents
| USB5744 - 4-Port SS/HS USB Hub Controller - Data Sheet | Data Sheets | 06/20/2016 | 658KB | |
|
| AN 26.2 - Implementation Guidelines for Microchip's USB 2.0 and USB 3.0 Hub Devices | AppNote | 08/11/2015 | 1203KB |  |
| AN1700 - FlexConnect Applications | AppNote | 03/31/2015 | 243KB | |
| AN1903 - AN1903 Configuration Options for the USB5734, USB5744 and USB5742 | AppNote | 06/22/2016 | 239KB | |
| AN1905 - USB Battery Charging with the USB57x4 Hub Controller Family | AppNote | 07/13/2015 | 327KB | |
| AN2050 - Disabling USB 3.1 Gen 1 Portion of Downstream Ports on Microchip USB57x4 Hubs | AppNote | 01/12/2016 | 215KB | |
| AN2051 - Microchip USB57xx USB Type-C Applications | AppNote | 01/13/2016 | 179KB | |
| AN26.16 - USB Super Speed Receiver Jitter Tolerance | AppNote | 04/25/2014 | 422KB | |
| AN26.21 - USB Device Design Checklist | AppNote | 08/10/2015 | 386KB | |
|
| USB57XX Sell Sheet | Brochures | 11/24/2015 | 1473KB | |
|
| ProTouch2 USB57X4 Linux SDK | Software Library | 12/15/2015 | | |
| ProTouch2 USB57X4 MAC SDK | Software Library | 12/15/2015 | | |
| Protouch2_V1.5_SmartHub_Configuration_Programming_Bridging_Tool | Software Library | 08/20/2015 | | |
| Protouch2_V1.6_SmartHub_Configuration_Programming_Bridging_Tool | Software Library | 04/01/2016 | | |
Ordering Information
| Part Number | Leads | Package Type | Temp Range | Packing | 1+ | 26+ | 100+ | 1000+ | 5000+ |
|---|
| USB5744/2G | 56 | VQFN | 0C to +70C | TRAY | 5.19 | 4.32 | 3.93 | 3.79 | 3.75 |
| USB5744-I/2G | 56 | VQFN | -40C to +85C | TRAY | 6.48 | 5.40 | 4.91 | 4.74 | 4.69 |
| USB5744T/2G | 56 | VQFN | 0C to +70C | T/R | 5.28 | 4.40 | 4.00 | 3.86 | 3.82 |
| USB5744T-I/2G | 56 | VQFN | -40C to +85C | T/R | 6.58 | 5.48 | 4.98 | 4.81 | 4.76 |
相关开发工具
Similar Devices
RoHS Information
| PartNumber | DeviceWeight | ShippingWeight | LeadCount | PackageType | PackageWidth | SolderComposition | JEDECIndicator | RoHS | ChinaEFUP |
|---|
| USB5744/2G | 0.136500 | 1.011539 | 56 | VQFN | 7x7x0.9mm | Matte Tin | e3 |  |  |
| USB5744-I/2G | 0.136500 | 1.011539 | 56 | VQFN | 7x7x0.9mm | Matte Tin | e3 | | |
| USB5744T-I/2G | 0.136500 | 0.233333 | 56 | VQFN | 7x7x0.9mm | Matte Tin | e3 | | |
| USB5744T/2G | 0.136500 | 0.233333 | 56 | VQFN | 7x7x0.9mm | Matte Tin | e3 | | |
