The SN74ABT16245A-EP is a 16-bit noninverting 3-state transceiver designed for synchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements.
This device can be used as two 8-bit transceivers or one 16-bit transceiver. It allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated.
When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impendance state above 2.1 V, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN74ABT16245A-EP is characterized for operation from -55°C to 125°C.
| SN74ABT16245A-EP | |
| Rating | HiRel Enhanced Product |
| Technology Family | ABT |
| 器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| CABT16245AMDLREP | ACTIVE | -55 to 125 | 2.25 | 1ku | SSOP (DL) | 48 | 1000 | LARGE T&R | |
| V62/06609-01XE | ACTIVE | -55 to 125 | 2.25 | 1ku | SSOP (DL) | 48 | 1000 | LARGE T&R |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| CABT16245AMDLREP | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | CABT16245AMDLREP | CABT16245AMDLREP |
| V62/06609-01XE | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | V62/06609-01XE | V62/06609-01XE |