凌力尔特公司制造了门类齐全的高性能电池充电器产品线，适用于任何可再充电化学电池(包括锂离子电池、铅酸电池和镍电池)。这些电池充电器 IC 既有采用线性拓扑结构，也有采用开关拓扑结构，而且在操作中是完全独立的。我们的 IC 提供了诸多电池安全和管理的标准功能，包括片上电池预查验、热调节、NTC 接口以及采用 SMBus 或 I2C 接口的双智能型电池系统管理。
| Product |
Vin Min (V) |
Vin Max (V) |
Max Charge Current (A) |
Type of Charger |
Battery Chemistry |
Number of Cells |
Comments |
Packages |
| LT1505 |
11 |
26 |
4 |
Switching |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 4 (Li), 1 to 12 (Ni) |
Synchronous switching controller for high current, high efficiency |
SSOP-28 |
| LT1510 |
7 |
29 |
1 |
Switching |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 4 (Li), 1 to 12 (Ni) |
500kHz integrated switching frequency for small solution |
SO-8, SSOP-16, SO-16 |
| LT1511 |
7 |
29 |
3 |
Switching |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 4 (Li), 1 to 12 (Ni) |
Integrated switching charger with 4A internal switch |
SO-24 |
| LT1512 |
2.4 |
29 |
0.75 |
Switching, Buck-Boost |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 4 (Li), 1 to 12 (Ni) |
Input supply voltage can be above or below battery voltage |
SO-8 |
| LT1513 |
2.4 |
29 |
2 |
Switching, Buck-Boost |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 4 (Li), 1 to 12 (Ni) |
Input supply voltage can be above or below battery voltage |
DD, T7 |
| LT1513 |
2.4 |
29 |
2 |
Switching, Buck-Boost |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 4 (Li), 1 to 18 (Ni) |
Input supply voltage can be above or below battery voltage |
DD, T7 |
| LT1571 |
6.2 |
27 |
1.5 |
Switching |
Li-Ion, Li-Polymer |
1, 2, Adj |
Integrated switching charger with C/10 detection/indicator |
SSOP-16, SSOP-28 |
| LT1769 |
7 |
29 |
2 |
Switching |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 4 (Li), 1 to 12 (Ni) |
Integrated switching charger in thermally enhanced exposed PAD 20-lead small shrink outline package |
TSSOP-20, SSOP-28 |
| LT3650-4.X |
4.75 |
32 |
2 |
Switching |
Li-Ion, Li-Polymer |
1 |
High Voltage 2 Amp Monolithic 1-Cell Li-Ion Battery Charger |
DFN-12, MS-12 |
| LT3650-4.X |
4.75 |
32 |
2 |
Switching |
Li-Ion, Li-Polymer |
1 |
High Voltage 2 Amp Monolithic 1-Cell Li-Ion Battery Charger |
DFN-12, MS-12 |
| LT3650-8.X |
4.75 |
32 |
2 |
Switching |
Li-Ion, Li-Polymer |
2 |
High Voltage 2 Amp Monolithic 2-Cell Li-Ion Battery Charger |
DFN-12, MS-12 |
| LT3650-8.X |
4.75 |
32 |
2 |
Switching |
Li-Ion, Li-Polymer |
2 |
High Voltage 2 Amp Monolithic 2-Cell Li-Ion Battery Charger |
DFN-12, MS-12 |
| LT3651-4.1 |
4.8 |
32 |
4 |
Switching |
Li-Ion, Li-Polymer |
1 |
Monolithic 4A High Voltage Li-Ion Battery Charger |
QFN-36 |
| LT3651-4.1 |
4.8 |
32 |
4 |
Switching |
Li-Ion, Li-Polymer |
1 |
Monolithic 4A High Voltage Li-Ion Battery Charger |
QFN-36 |
| LT3651-8.2 |
9 |
32 |
4 |
Switching |
Li-Ion, Li-Polymer |
2 |
Monolithic 4A High Voltage 2-Cell Li-Ion Battery Charger |
QFN-36 |
| LT3651-8.2 |
9 |
32 |
4 |
Switching |
Li-Ion, Li-Polymer |
2 |
Monolithic 4A High Voltage 2-Cell Li-Ion Battery Charger |
QFN-36 |
| LT3652 |
4.95 |
32 |
2 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, NiCd, NiMH, Lead Acid |
1-3 Li-Ion/Li-Poly, 1-4 LiFePO4, NiMH/NiCd up to 14.4V, SLA up to 14.4 |
Power Tracking 2A Battery Charger for Solar Power |
DFN-12, MS-12 |
| LT3652HV |
4.95 |
34 |
2 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, NiCd, NiMH, Lead Acid |
1-4 Li-Ion/Li-Poly, 1-5 LiFePO4, SLA up to 18V |
Power Tracking 2A Battery Charger |
DFN-12, MS-12 |
| LT3761 |
4.5 |
60 |
20 |
Switching |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
Set by external charger IC |
60Vin LED Controller with Internal PWM Generator |
MS-16 |
| LT3796 |
6 |
100 |
20 |
Switching |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
Set by externals |
100V Constant-Current and Constant-Voltage Controller with Dual Current Sense |
TSSOP-28 |
| LTC1729 |
|
|
|
Termination Controller |
Li-Ion, Li-Polymer, LiFePO4, NiCd, NiMH, Lead Acid |
Operates with all LTC switching chargers. built-in 3-hour time-out termination. C/10 detection with status indicator |
MS-8, SO-8 |
| LTC1730 |
4.5 |
12 |
1.3 |
Pulse |
Li-Ion, Li-Polymer |
1 |
Minimum heat dissipation. Selectable 4.1V/4.2V. current limit protection. for use current limited wall adapter |
SSOP-16, SO-8 |
| LTC1731-4.2 |
4.5 |
12 |
2 |
linear |
Li-Ion, Li-Polymer |
1 |
linear charger with AC adapter detection |
MS-8, SO-8 |
| LTC1731-4.2 |
4.5 |
12 |
2 |
linear |
Li-Ion, Li-Polymer |
1 |
linear charger with AC adapter detection |
MS-8, SO-8 |
| LTC1731-8.4 |
4.5 |
12 |
2 |
linear |
Li-Ion, Li-Polymer |
2 |
linear charger with AC adapter detection |
MS-8, SO-8 |
| LTC1731-8.4 |
4.5 |
12 |
2 |
linear |
Li-Ion, Li-Polymer |
2 |
linear charger with AC adapter detection |
MS-8, SO-8 |
| LTC1732-4 |
4.5 |
12 |
2 |
linear |
Li-Ion, Li-Polymer |
1 |
Complete stand-alone linear charger; needs no firmware |
MS-10 |
| LTC1732-4.2 |
4.5 |
12 |
2 |
linear |
Li-Ion, Li-Polymer |
1 |
Complete, stand-alone linear charger. needs no firmware |
MS-10 |
| LTC1732-8.4 |
4.5 |
12 |
2 |
linear |
Li-Ion, Li-Polymer |
2 |
Complete, stand-alone linear charger. needs no firmware |
MS-10 |
| LTC1733 |
4.5 |
6.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
Thermal regulation for no overheating. integrated MOSFET, RSENSE, Diode. Stand-alone. Thermistor interface |
MS-10 |
| LTC1734 |
4.55 |
8 |
0.7 |
linear |
Li-Ion, Li-Polymer |
1 |
SOT-23 linear charger; only three components for complete solution |
ThinSOT |
| LTC1734 |
4.55 |
8 |
0.7 |
linear |
Li-Ion, Li-Polymer |
1 |
SOT-23 linear charger; only three components for complete solution |
ThinSOT |
| LTC1734L |
4.55 |
8 |
0.18 |
linear |
Li-Ion, Li-Polymer |
1 |
Precision ultralow charge current linear charger |
ThinSOT |
| LTC1759 |
6.7 |
26 |
8 |
Switching, SMBus |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 4 (Li), 1 to 17 (Ni) |
SMBus Charger with integrated SMBus AcceleratorTM |
SSOP-36 |
| LTC1760 |
6 |
28 |
4 |
Switching, SMBus |
Li-Ion, Li-Polymer, NiCd, NiMH |
2 to 6 (Li) |
Dual battery selector and charger. crisis management. SMBus v. 1.1, Level 2 charger. Operates with or without host microcontroller |
TSSOP-48 |
| LTC1960 |
6 |
28 |
4 |
Switching, SPI |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 18 (Ni), 2 to 6 (Li) |
Dual battery selector and charger. fast charge. crisis management |
SSOP-36, QFN-38 |
| LTC1980 |
4.1 |
12 |
2 |
Switching, Buck-Boost |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1, 2 |
Combination battery charger and system DC/DC converter |
SSOP-24 |
| LTC2941 |
2.7 |
5.5 |
|
Coulomb Counter |
Li-Ion, Li-Polymer |
1 |
Battery Gas Gauge with I2C Interface |
DFN-6 |
| LTC2941-1 |
2.7 |
5.5 |
|
Coulomb Counter |
Li-Ion, Li-Polymer |
1 |
1A I2C Battery Gas Gauge with Internal Sense Resistor |
DFN-6 |
| LTC2942 |
2.7 |
5.5 |
|
Coulomb Counter |
Li-Ion, Li-Polymer |
1 |
Battery Gas Gauge with Temperature, Voltage Measurement |
DFN-6 |
| LTC2942-1 |
2.7 |
5.5 |
|
Coulomb Counter |
Li-Ion, Li-Polymer |
1 |
1A Battery Gas Gauge with Internal Sense Resistor and Temperature/Voltage Measurement |
DFN-6 |
| LTC3101 |
1.8 |
5.5 |
|
- |
Alkaline |
- |
Wide Vin, Multi-Output DC/DC Converter and PowerPath Controller |
QFN-24 |
| LTC3300-1 |
|
|
|
Li-Ion, LiFePO4 |
> 1000V of stacked Li-Ion cells |
High Efficiency Bidirectional Multicell Battery Balancer |
QFN-48, LQFP-48 |
| LTC3455 |
4.3 |
5.5 |
1 |
linear |
Li-Ion, Li-Polymer |
1 |
Dual DC/DC Converter with USB Power Manager and Li-Ion Battery Charger |
QFN-24 |
| LTC3456 |
1.8 |
5.5 |
|
- |
Alkaline, NiCd, NiMH |
- |
2-Cell, Multi-Output DC/DC Converter with USB Power Manager |
QFN-24 |
| LTC3550 |
4.3 |
8 |
0.95 |
linear |
Li-Ion, Li-Polymer |
1 |
Dual Input USB/AC Adapter Li-Ion Battery Charger with 600mA Buck Converter |
DFN-16 |
| LTC3550-1 |
4.3 |
8 |
0.95 |
linear |
Li-Ion, Li-Polymer |
1 |
Dual Input USB/AC Adapter Li-Ion Battery Charger with 600mA Buck Converter |
DFN-16 |
| LTC3552 |
2.5 |
5.5 |
0.95 |
linear |
Li-Ion, Li-Polymer |
1 |
Standalone linear Li-Ion Battery Charger and Dual Synchronous Buck Converter |
DFN-16 |
| LTC3552-1 |
2.5 |
5.5 |
0.95 |
linear |
Li-Ion, Li-Polymer |
1 |
Standalone linear Li-Ion Battery Charger and Dual Synchronous Buck Converter |
DFN-16 |
| LTC3553 |
4.35 |
5.5 |
0.5 |
linear |
Li-Ion, Li-Polymer |
1 |
Micropower USB Power Manager With Li-Ion Charger, LDO and Buck Regulator |
QFN-20 |
| LTC3553-2 |
4.35 |
5.5 |
0.5 |
linear |
Li-Ion, Li-Polymer |
1 |
Micropower USB Power Manager With Li-Ion Charger, Always-On LDO and Buck Regulator with Power Good |
QFN-20 |
| LTC3554 |
2.7 |
5.5 |
0.4 |
linear |
Li-Ion, Li-Polymer |
1 |
Micropower USB Power Manager With Li-Ion Charger and Two Step-Down Regulators |
QFN-20 |
| LTC3554 |
2.7 |
5.5 |
0.4 |
linear |
Li-Ion, Li-Polymer |
1 |
Micropower USB Power Manager With Li-Ion Charger and Two Step-Down Regulators, Extended Hard Reset Time |
QFN-20 |
| LTC3554 |
2.7 |
5.5 |
0.4 |
linear |
Li-Ion, Li-Polymer |
1 |
Micropower USB Power Manager With Li-Ion Charger and Two Step-Down Regulators, Extended Hard Reset Time |
QFN-20 |
| LTC3555 |
2.7 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
High Efficiency USB Power Manager + Triple Step-Down DC/DC |
QFN-28 |
| LTC3556 |
4.35 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
High Ef铿乧iency USB Power Manager with Dual Buck and Buck-Boost DC/DCs |
QFN-28 |
| LTC3557 |
2.7 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Li-Ion Charger and Three Step Down Regulators |
QFN-28 |
| LTC3558 |
4.3 |
5.5 |
0.95 |
linear |
Li-Ion, Li-Polymer |
1 |
linear USB Battery Charger with Buck and Buck-Boost Regulators |
QFN-20 |
| LTC3559 |
3 |
5.5 |
0.95 |
linear |
Li-Ion, Li-Polymer |
1 |
linear USB Battery Charger with Dual Buck Regulators |
QFN-16 |
| LTC3566 |
4.35 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
High Ef铿乧iency USB Power Manager Plus 1A Buck-Boost Converter |
QFN-24 |
| LTC3567 |
4.35 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
High Ef铿乧iency USB Power Manager Plus 1A Buck-Boost Converter with I2C Control |
QFN-24 |
| LTC3576 |
4.35 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
Switching Power Manager with USB On-The-Go + Triple Step-Down DC/DC |
QFN-38 |
| LTC3577 |
4.35 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
Highly Integrated 6-Channel Portable PMIC |
QFN-44 |
| LTC3577 |
4.35 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
Highly Integrated 6-Channel Portable PMIC |
QFN-44 |
| LTC3577-3_-4 |
4.35 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
Highly Integrated Portable Product PMIC |
QFN-44 |
| LTC3577-3_-4 |
4.35 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
Highly Integrated Portable Product PMIC |
QFN-44 |
| LTC3586 |
4.35 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
High Efficiency USB Power Manager with Boost, Buck-Boost and Dual Bucks, Fault Pin Bi-Directional with Latch, 300mV Boost Overvoltage Hysteresis |
QFN-38 |
| LTC3586 |
4.35 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
High Efficiency USB Power Manager with Boost, Buck-Boost and Dual Bucks, Fault Pin Bi-Directional with Latch, 300mV Boost Overvoltage Hysteresis |
QFN-38 |
| LTC3586-2 |
4.35 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
High Efficiency USB Power Manager with Boost, Buck-Boost and Dual Bucks, Fault Pin Output Only, No Latch, 100mV Boost Overvoltage Hysteresis |
QFN-38 |
| LTC3586-2 |
4.35 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
High Efficiency USB Power Manager with Boost, Buck-Boost and Dual Bucks, Fault Pin Output Only, No Latch, 100mV Boost Overvoltage Hysteresis |
QFN-38 |
| LTC3677-3 |
4.35 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
Highly Integrated Portable Product PMIC |
QFN-44 |
| LTC4000 |
3 |
60 |
20 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, NiCd, NiMH, Lead Acid |
Set by external charger IC |
High Voltage High Current Controller for Battery Charging and Power Management |
QFN-28, SSOP-28 |
| LTC4000-1 |
3 |
60 |
20 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, NiCd, NiMH, Lead Acid |
Set by external charger IC |
High Voltage High Current Controller for Battery Charging with Maximum Power Point Control |
QFN-28, SSOP-28 |
| LTC4001 |
4 |
5.5 |
2 |
Switching |
Li-Ion, Li-Polymer |
1 |
2A Synchronous Buck Li-Ion Charger |
QFN-16 |
| LTC4001-1 |
4 |
5.5 |
2 |
Switching |
Li-Ion, Li-Polymer |
1 |
2A Synchronous Buck Li-Ion Charger |
QFN-16 |
| LTC4002 |
4.7 |
24 |
3 |
Switching |
Li-Ion, Li-Polymer |
1 |
Charges 1-cell Li-Ion battery from high Vin |
DFN-10, SO-8 |
| LTC4002 |
8.9 |
24 |
3 |
Switching |
Li-Ion, Li-Polymer |
2 |
Charges 2-cell Li-Ion battery from high Vin |
DFN-10, SO-8 |
| LTC4006 |
6 |
28 |
4 |
Switching |
Li-Ion, Li-Polymer |
2 to 4 |
Small IC, standalone |
SSOP-16 |
| LTC4007 |
6 |
28 |
4 |
Switching |
Li-Ion, Li-Polymer |
3, 4 |
Full featrued, standalone |
SSOP-24 |
| LTC4007-1 |
6 |
28 |
4 |
Switching |
Li-Ion, Li-Polymer |
3, 4 |
4A, High Efficiency, Li-Ion Battery Charger |
QFN-24 |
| LTC4008 |
6 |
28 |
4 |
Switching |
Li-Ion, Li-Polymer, NiCd, NiMH, LiFePO4, Lead Acid |
1 to 6 (Li), 4 to 18 (Ni) |
Very small design, low profile inductors |
SSOP-20 |
| LTC4009 |
6 |
28 |
8 |
Switching |
Li-Ion, Li-Polymer, NiCd, NiMH, LiFePO4, Lead Acid |
1 to 6 (Li), 2 to 18 (Ni) |
High Efficiency, Multi-Chemistry Battery Charger |
QFN-20 |
| LTC4009 |
6 |
28 |
8 |
Switching |
Li-Ion, Li-Polymer |
1 to 4 (Li) |
High Efficiency, Multi-Chemistry Battery Charger |
QFN-20 |
| LTC4009 |
6 |
28 |
8 |
Switching |
Li-Ion, Li-Polymer |
1 to 4 (Li) |
High Efficiency, Multi-Chemistry Battery Charger |
QFN-20 |
| LTC4010 |
4.5 |
34 |
4 |
Switching |
NiCd, NiMH |
1 to 16 |
Nickel Battery Charger Controller |
TSSOP-16 |
| LTC4011 |
4.5 |
34 |
4 |
Switching |
NiCd, NiMH |
1 to 16 |
Nickel Battery Charger Controller with PowerPath Control |
TSSOP-20 |
| LTC4012 |
6 |
28 |
12 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, NiCd, NiMH, Lead Acid |
1 to 6 (Li), 2 to 18 (Ni) |
High Efficiency, Multi-Chemistry Battery Charger with PowerPath Control |
QFN-20 |
| LTC4012 |
6 |
28 |
12 |
Switching |
Li-Ion, Li-Polymer |
1 to 4 (Li) |
High Efficiency, Multi-Chemistry Battery Charger with PowerPath Control |
QFN-20 |
| LTC4012 |
6 |
28 |
12 |
Switching |
Li-Ion, Li-Polymer |
1 to 4 (Li) |
High Efficiency, Multi-Chemistry Battery Charger with PowerPath Control |
QFN-20 |
| LTC4012-3 |
6 |
28 |
12 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, NiCd, NiMH, Lead Acid |
1 to 6 (Li), 4 to 18 (Ni) |
High Efficiency, Multi-Chemistry Battery Charger with PowerPath Control |
QFN-20 |
| LTC4050 |
4.5 |
12 |
2 |
linear |
Li-Ion, Li-Polymer |
1 |
LTC1732 + thermistor interface |
MS-10 |
| LTC4052-4.2 |
4.5 |
10 |
1.3 |
Pulse |
Li-Ion, Li-Polymer |
1 |
Minimum heat dissipation. current limit for safety. standalone |
MS-10 |
| LTC4053-4.2 |
4.25 |
6.5 |
1.25 |
linear |
Li-Ion, Li-Polymer |
1 |
USB compatible. complete and standalone. thermal regulation prevents overheating |
MS-10, DFN-10 |
| LTC4054-4.2 |
4.25 |
6.5 |
0.8 |
linear |
Li-Ion, Li-Polymer |
1 |
Fully integrated, standalone, thermal regulation |
ThinSOT |
| LTC4054L-4.2 |
4.25 |
6.5 |
0.15 |
linear |
Li-Ion, Li-Polymer |
1 |
Precision ultralow charge current linear charger. standalone |
ThinSOT |
| LTC4054X-4.2 |
4.25 |
6.5 |
0.8 |
linear |
Li-Ion, Li-Polymer |
1 |
High trickle charge current |
ThinSOT |
| LTC4055 |
4.3 |
5.5 |
1.25 |
linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Low-Loss 200mohm Ideal Diode and Li-Ion Battery Charger |
QFN-16 |
| LTC4056-4.2 |
4.5 |
6.5 |
0.7 |
linear |
Li-Ion, Li-Polymer |
1 |
No charging interruption due to input voltage fluctuation |
ThinSOT |
| LTC4057-4.2 |
4.25 |
6.5 |
0.8 |
linear |
Li-Ion, Li-Polymer |
1 |
LTC4054 with external charge termination control |
ThinSOT |
| LTC4058-4.2 |
4.25 |
6.5 |
0.95 |
linear |
Li-Ion, Li-Polymer |
1 |
Complete, standalone linear charger in DFN package with Trickle Charge |
DFN-8 |
| LTC4058-4.2 |
4.25 |
6.5 |
0.95 |
linear |
Li-Ion, Li-Polymer |
1 |
Complete, standalone linear charger in DFN package, No Trickle Charge |
DFN-8 |
| LTC4059 |
3.75 |
8 |
0.9 |
linear |
Li-Ion, Li-Polymer, NiCd, NiMH |
1 |
Constant-Current Source Mode for Charging Nickel Batteries (LTC4059 Only) |
DFN-6 |
| LTC4059 |
3.75 |
8 |
0.9 |
linear |
Li-Ion, Li-Polymer, NiCd, NiMH |
1 |
ACPR Pin Indicates Presence of Input Supply (LTC4059A Only) |
DFN-6 |
| LTC4060 |
4.5 |
10 |
2 |
linear |
NiCd, NiMH, Lead Acid |
1 to 4 |
Standalone linear NiMH/NiCd Fast Battery Charger |
DFN-16, TSSOP-16 |
| LTC4061 |
4.3 |
8 |
1 |
linear |
Li-Ion, Li-Polymer |
1 |
Standalone linear Li-Ion Battery Charger with Thermistor Input |
DFN-10 |
| LTC4061-4.4 |
4.5 |
8 |
1 |
linear |
Li-Ion, Li-Polymer |
1 |
Standalone linear Li-Ion Battery Charger with Thermistor Input |
DFN-10 |
| LTC4062 |
4.3 |
8 |
1 |
linear |
Li-Ion, Li-Polymer |
1 |
On board micropower comparator for battery monitoring |
DFN-10 |
| LTC4063 |
4.3 |
8 |
1 |
linear |
Li-Ion, Li-Polymer |
1 |
Standalone linear Li-Ion Charger with Micropower Low Dropout linear Regulator |
DFN-10 |
| LTC4064 |
4.25 |
6.5 |
1 |
linear |
Li-Ion, Li-Polymer |
1 |
For battery backup. 4.0V float voltage |
MS-10 |
| LTC4065 |
3.75 |
5.5 |
0.75 |
linear |
Li-Ion, Li-Polymer |
1 |
Standalone 750mA Li-Ion Battery Charger in 2 x 2 DFN |
DFN-6 |
| LTC4065-4.4 |
3.75 |
5.5 |
0.75 |
linear |
Li-Ion, Li-Polymer |
1 |
Standalone 750mA Li-Ion Battery Charger in 2x2 DFN |
DFN-6 |
| LTC4065L |
3.75 |
5.5 |
0.25 |
linear |
Li-Ion, Li-Polymer |
1 |
Standalone 250mA Li-Ion Battery Charger in 2 脳 2 DFN |
DFN-6 |
| LTC4066 |
4.35 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Low-Loss 50mohm Ideal Diode and Li-Ion Battery Charger |
QFN-24 |
| LTC4067 |
4.35 |
5.5 |
1.25 |
linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with OVP and Li-Ion/Polymer Charger |
DFN-12 |
| LTC4068-4.2 |
4.25 |
6.5 |
0.95 |
linear |
Li-Ion, Li-Polymer |
1 |
Adjustable charge termination current |
DFN-8 |
| LTC4069 |
3.75 |
5.5 |
0.75 |
linear |
Li-Ion, Li-Polymer |
1 |
Standalone 750mA Li-Ion Battery Charger in 2 脳 2 DFN with NTC Thermistor Input |
DFN-6 |
| LTC4069-4.4 |
3.75 |
5.5 |
0.75 |
linear |
Li-Ion, Li-Polymer |
1 |
Standalone 750mA Li-Ion Battery Charger in 2x2 DFN with NTC Thermistor Input |
DFN-6 |
| LTC4070 |
|
|
0.05 |
Shunt |
Li-Ion, Li-Polymer |
1 |
Li-Ion/Polymer Shunt Battery Charger System |
DFN-8, MSOP-8E |
| LTC4071 |
|
|
0.05 |
Shunt |
Li-Ion, Li-Polymer |
1 |
Li-Ion/Polymer Shunt Battery Charger System with Low Battery Disconnect |
DFN-8, MSOP-8 |
| LTC4075 |
4.3 |
8 |
0.95 |
linear |
Li-Ion, Li-Polymer |
1 |
Dual Input USB/AC Adapter Standalone Li-Ion Battery Chargers |
DFN-10 |
| LTC4075HVX |
4.3 |
22 |
0.95 |
linear |
Li-Ion, Li-Polymer |
1 |
High Voltage Dual Input Li-Ion/Polymer Battery Charger |
DFN-10 |
| LTC4075X |
4.3 |
8 |
0.95 |
linear |
Li-Ion, Li-Polymer |
1 |
Dual Input USB/AC Adapter Standalone Li-Ion Battery Chargers with No Trickle Charge |
DFN-10 |
| LTC4076 |
4.3 |
8 |
1 |
linear |
Li-Ion, Li-Polymer |
1 |
Dual Input Standalone Battery Charger |
DFN-10 |
| LTC4077 |
4.3 |
8 |
1 |
linear |
Li-Ion, Li-Polymer |
1 |
Dual Input Standalone Battery Charger |
DFN-10 |
| LTC4078 |
4.3 |
22 |
0.95 |
linear |
Li-Ion, Li-Polymer |
1 |
Dual Input Li-Ion Battery Charger with Overvoltage Protection |
DFN-10 |
| LTC4080 |
3.75 |
5.5 |
0.5 |
linear |
Li-Ion, Li-Polymer |
1 |
500mA Standalone Li-Ion Charger with Integrated 300mA Synchronous Buck in 3mm x 3mm DFN |
DFN-10, MS-10 |
| LTC4080X |
3.75 |
5.5 |
0.5 |
linear |
Li-Ion, Li-Polymer |
1 |
500mA Standalone Li-Ion Charger with Integrated 300mA Synchronous Buck in 3mm 脳 3mm DFN |
DFN-10, MS-10 |
| LTC4081 |
3.75 |
5.5 |
0.5 |
linear |
Li-Ion, Li-Polymer |
1 |
500mA Li-Ion Charger with NTC Input and 300mA Synchronous Buck |
DFN-10 |
| LTC4085 |
4.35 |
5.5 |
1.2 |
linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Ideal Diode Controller and Li-Ion Charger with 4.2V Float Voltage, 29% Vvntc, Undervoltage Current Limit |
DFN-14 |
| LTC4085-1 |
4.35 |
5.5 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Ideal Diode Controller and 4.1V Li-Ion Charger, 32.6% Vvntc, Undervoltage Current Limit |
DFN-14 |
| LTC4085-3 |
4.35 |
5.5 |
1.2 |
linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Ideal Diode Controller and 3.95V Li-Ion Charger, 32.6% Vvntc, No Undervoltage Current Limit |
DFN-14 |
| LTC4085-3 |
4.35 |
5.5 |
1.2 |
linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Ideal Diode Controller and 3.95V Li-Ion Charger, 32.6% Vvntc, No Undervoltage Current Limit |
DFN-14 |
| LTC4088 |
4.25 |
5.5 |
1.5 |
Switching |
Li-Ion, Li-Polymer |
1 |
High Efficiency Battery Charger/USB Power Manager |
DFN-14 |
| LTC4088-1_-2 |
4.25 |
5.5 |
1.5 |
Switching |
Li-Ion, Li-Polymer |
1 |
High Efficiency Battery Charger/USB Power Manager with Regulated Output Voltage |
DFN-14 |
| LTC4089 |
6 |
36 |
1.2 |
linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with High Voltage Switching Charger |
DFN-22 |
| LTC4089-1 |
6 |
36 |
1.2 |
linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with High Voltage Switching Charger |
DFN-22 |
| LTC4089-3 |
6 |
36 |
1.2 |
linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with High Voltage Switching Charger |
DFN-22 |
| LTC4089 |
6 |
36 |
1.2 |
linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with High Voltage Switching Charger, Fixed 5V Output |
DFN-22 |
| LTC4090 |
6 |
38 |
1.5 |
linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager + Triple Sync Buck |
DFN-22 |
| LTC4095 |
4.3 |
5.5 |
0.95 |
linear |
Li-Ion, Li-Polymer |
1 |
Standalone USB Li-Ion/Polymer Battery Charger in 2mm x 2mm DFN |
DFN-6 |
| LTC4096 |
4.25 |
5.5 |
1.2 |
linear |
Li-Ion, Li-Polymer |
1 |
Dual Input Standalone Li-Ion Battery Chargers |
DFN-10 |
| LTC4097 |
4.25 |
5.5 |
1.2 |
linear |
Li-Ion, Li-Polymer |
1 |
USB/Wall Adapter Standalone Li-Ion/Polymer Battery Charger |
DFN-12 |
| LTC4098 |
4.35 |
5.5 |
1.5 |
Switching |
Li-Ion, Li-Polymer |
1 |
USB Compatible Switching Power Manager/Li-Ion Charger with Overvoltage Protection |
QFN-20 |
| LTC4098 |
4.35 |
5.5 |
1.5 |
Switching |
Li-Ion, Li-Polymer |
1 |
USB Compatible Switching Power Manager/Li-Ion Charger with Overvoltage Protection |
QFN-20 |
| LTC4098-3.6 |
4.35 |
5.5 |
1.5 |
Switching |
LiFePO4 |
1 |
USB Compatible Switching Power Manager/LiFePO4 Charger with Overvoltage Protection |
QFN-20 |
| LTC4099 |
4.35 |
5.5 |
1.5 |
Switching, I2C |
Li-Ion, Li-Polymer |
1 |
I2C Controlled USB Power Manager/Charger with Overvoltage Protection |
QFN-20 |
| LTC4100 |
6 |
28 |
4 |
Switching, SMBus |
Li-Ion, Li-Polymer, NiCd, NiMH |
2 to 6 (Li) |
SMBus v. 1.1, Level 2 charger. Operates with or without host microcontroller |
SSOP-24 |
| LTC4101 |
6 |
28 |
4 |
Switching, SMBus |
Li-Ion, Li-Polymer, NiCd, NiMH |
1 (Li) |
Smart Battery Charger Controller |
SSOP-24 |
| LTC4110 |
4.5 |
19 |
3 |
Switching |
Li-Ion, Li-Polymer, Lead Acid, NiMH, NiCd |
1-4 Li, up to 10 Ni, up to 6 SLA |
Battery Backup System Manager |
QFN-38 |
| LTC4150 |
2.7 |
8.5 |
|
Gas Gauge |
Li-Ion, Li-Polymer, Lead Acid, NiMH, NiCd |
1 |
Coulomb Counter/Battery Gas Gauge |
MS-10 |
| LTC4155 |
4.35 |
5.5 |
3.5 |
Switching, I2C |
Li-Ion, Li-Polymer |
1 |
Dual Input Power Manager / 3.5A Li-Ion Battery Charger with I2C Control and USB OTG |
QFN-28 |
| LTC4156 |
4.35 |
5.5 |
3.5 |
Switching |
LiFePO4 |
1 |
Dual-Input Power Manager / 3.5A LiFePO4 Battery Charger with I2C Control and USB OTG |
QFN-28 |
| LTC4160 |
4.35 |
5.5 |
1.2 |
linear |
Li-Ion, Li-Polymer |
1 |
Switching Power Manager with USB On-The-Go And Overvoltage Protection |
QFN-20 |
| LTC4160 |
4.35 |
5.5 |
1.2 |
linear |
Li-Ion, Li-Polymer |
1 |
Switching Power Manager with USB On-The-Go And Overvoltage Protection |
QFN-20 |
| LTC6801 |
|
60 |
|
Battery Stack Monitor |
Li-Ion |
> 1000V of stacked Li-Ion cells |
Independent Multicell Battery Stack Fault Monitor |
SSOP-36 |
| LTC6802-1 |
60 |
|
Battery Stack Monitor |
Li-Ion |
> 1000V of stacked Li-Ion cells |
Multicell Battery Stack Monitor, Daisy Chainable SPI Interface |
SSOP-44 |
| LTC6802-2 |
60 |
|
Battery Stack Monitor |
Li-Ion |
> 1000V of stacked Li-Ion cells |
Multicell Battery Stack Monitor, Individually Addressable SPI Interface |
SSOP-44 |
| LTC6803-1_-3 |
60 |
|
Battery Stack Monitor |
Li-Ion, Supercapacitors, Multi-Chemistry |
> 1000V of stacked Li-Ion cells |
Multicell Battery Stack Monitor, Serial interface allows daisy chain, -1 Version connects bottom of stack to V- |
SSOP-44 |
| LTC6803-2_-4 |
60 |
|
Battery Stack Monitor |
Li-Ion, Supercapacitors, Multi-Chemistry |
> 1000V of stacked Li-Ion cells |
Multicell Battery Stack Monitor, Individually addressable serial communciations, -2 Connects bottom of stack to V- |
SSOP-44 |
| LTC6803-1_-3 |
60 |
|
Battery Stack Monitor |
Li-Ion, Supercapacitors, Multi-Chemistry |
> 1000V of stacked Li-Ion cells |
Multicell Battery Stack Monitor, Serial interface allows daisy chain, -3 Separates bottom of stack from V- |
SSOP-44 |
| LTC6803-2_-4 |
60 |
|
Battery Stack Monitor |
Li-Ion, Supercapacitors, Multi-Chemistry |
> 1000V of stacked Li-Ion cells |
Multicell Battery Stack Monitor, Individually addressable serial communciations, -4 Separates bottom of stack from V- |
SSOP-44 |
| LTM8061 |
4.95 |
32 |
2 |
Switching |
Li-Ion, Li-Polymer |
1, 2 |
32V, 2A uModule Li Ion Constant-Current/Constant Voltage Battery Charger |
9mm x 15mm x 4.32mm LGA |
| LTM8062 |
4.95 |
32 |
2 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, Lead Acid |
1-4 Li-Ion/Li-Poly, 1-5 LiFePO4, SLA up to 14.4V |
32VIN, 2A 渭Module Power Tracking Battery Charger |
9mm x 15mm x 4.32mm LGA |
| LTM8062 |
4.95 |
32 |
2 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, Lead Acid |
1-4 Li-Ion/Li-Poly, 1-5 LiFePO4, SLA up to 18.8V |
32VIN, 2A 渭Module Power Tracking Battery Charger |
9mm x 15mm x 4.32mm LGA |
