The STM8T141 is a ProxSense™ single-channel, fully integrated, charge-transfer, capacitive sensor that is designed to replace conventional electromechanical switches in cost-sensitive applications.
The STM8T141 is offered in 8-pin packages and is ideally suited for 1-button applications. It can be configured either in touch or proximity sensing mode for wake-up or backlighting on actuation.
The extremely low current consumption makes it an ideal solution for battery-powered applications.
The device features an internal voltage regulator to enhance detection sensitivity and stability.
The STM8T141 touchpad can sense through almost any dielectric and can thereby contain the electronics in a sealed environment.
The STM8T141 also incorporates the advantages of using a driven shielding capability. This makes it possible to separate the sealed electronics from the sensing electrode. The shield feature enables the designer to protect part of the sensing element from unwanted environmental interference and enhance proximity detection when used with battery (DC) applications.
描述 |
版本 |
大小 |
AN3266: Using the STM8S-DISCOVERY GPIOs and interrupt controller to drive LEDs |
1 |
109KB |
AN2658: 如何使用STM8S微控制器中的 模数转换器 |
1 |
342KB |
AN2658: Using the analog to digital converter of the STM8S microcontroller |
2 |
190KB |
AN2781: UART emulation software in STM8S and STM8A microcontrollers |
2 |
103KB |
AN3298: STM8S DALI slave library |
1 |
393KB |
AN2822: STM8S and STM8A high speed internal oscillator calibration |
2 |
197KB |
AN2857: STM8S系列MCU功耗管理 |
1 |
423KB |
AN2857: STM8S and STM8A family power management |
3 |
271KB |
AN2945: STM8S and STM32™ MCUs: a consistent 8/32-bit product line for painless migration |
1 |
213KB |
AN3281: STM8 I²C optimized examples |
1 |
225KB |
AN2659: STM8 in-application programming (IAP) using a customized user-bootloader |
3 |
236KB |
AN3258: STM8A/S HSI oscillator calibration using LIN automatic resynchronization |
1 |
176KB |
AN2639: Soldering recommendations and package information for Lead-free ECOPACK® microcontrollers |
2 |
209KB |
AN1015: Software techniques for improving microcontroller EMC performance |
1 |
105KB |
AN2646: Smartcard interface with the STM8S microcontroller |
2 |
442KB |
AN3259: RS232 communications with a terminal using the STM8S-DISCOVERY |
1 |
304KB |
AN2780: Real-time keeping on STM8S and STM8A devices and usage of auto-wakeup unit (AWU) and beeper |
2 |
388KB |
AN2927: RC acquisition principle for touch sensing applications |
2 |
157KB |
AN2719: Precision improvement techniques for the A/D converter of the STM8 microcontroller |
2 |
239KB |
AN2867: Oscillator design guide for STM8S, STM8A, and STM32F1 microcontrollers |
6 |
280KB |
AN2645: Migration and compatibility guidelines for STM8S microcontroller applications |
1 |
524KB |
AN3208: Microstepping motor drive with STM8A and STM8S microcontrollers |
1 |
286KB |
AN3265: Handling hardware and software failures with the STM8S-DISCOVERY |
1 |
192KB |
AN3236: Guidelines to increase the number of touchkeys with the STM8 Touch Sensing Library |
1 |
202KB |
AN3181: Guidelines for obtaining IEC60335 Class B certification in an STM8 application |
1 |
458KB |
AN2869: Guidelines for designing touch sensing applications |
6 |
980KB |
AN2752: Getting started with the STM8S and STM8A |
5 |
2224KB |
AN3332: Generating PWM signals using STM8S-DISCOVERY |
1 |
86KB |
AN2860: EMC guidelines for STM8 microcontrollers |
4 |
215KB |
AN1709: EMC design guide for ST microcontrollers |
1 |
657KB |
AN1181: Electrostatic discharge sensitivity measurement |
1 |
59KB |
AN3280: Displaying variable voltage on a bar of LEDs using STM8S-DISCOVERY |
1 |
154KB |
AN3260: Building a thermometer using the STM8S-DISCOVERY |
1 |
293KB |
AN3255: Building an RFID short-range reader using the STM8S-DISCOVERY |
1 |
436KB |
AN2737: Basic in-application programming example using the STM8 I²C and SPI peripherals |
3 |
186KB |
AN3143: Audio software codec for the STM8S |
1 |
251KB |
AN3279: Adjustable LED blinking speed using STM8S-DISCOVERY touch sensing key |
1 |
153KB |
AN3277: Adjustable buzzer frequency using STM8S-DISCOVERY touch sensing key |
1 |
193KB |
Part Number |
描述 |
STM-STUDIO |
STM Studio run-time variables monitoring and visualization tool |
STVP |
ST Visual Programmer for programming ST7, STM8, STM8T and STM32 |
STM8L15LPBOARD |
Low-cost demonstration board for STM8L (32KB flash) Low Power MCUs |
AD/Stice_Connect |
Connection Adapter to use with STICE-SYS00x emulation systems |
STM8-TOUCH-LIB |
STM8 touch sensing library |
ST-LINK |
In-circuit debugger and programmer for STM8 and STM32 MCUs; with IAR EWARM and Keil RVMDK and ST toolset |
AS/Stice_Connect |
Adapter Socket for application board - to use with STICE-SYS00x emulation systems |
STMPRIMER |
EvoPrimer components to build your own EvoPrimer for easy evaluation and development with STM32 and STM8 MCUs |
STM8L-PRIMER |
Complete EvoPrimer ready to use from Raisonance for easy evaluation and development with STM8L MCUs |
STM8L-DISCOVERY |
Discovery kit for the STM8L EnergyLite 8-bit MCUs |
ST-LINK/V2 |
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 |
STVD |
ST Visual develop IDE for developing ST7 and STM8 applications |
STM8S-DISCOVERY |
Discovery kit for the STM8S general-purpose 8-bit MCUs |
STICE |
Full-featured emulator offers flexible, modular debugging and programming solution |
STX-RLINK |
In-circuit debugger/programmer supporting JTAG and ICC protocols for STM8, ST7, uPSD, STM32, STR7 and STR9 microcontrollers |
CF/Stice_Connect |
Connexion flex to use with STICE-SYS00x emulation systems |
STMT/8L-EV1 |
Touch sensing Library for STM8L - Evaluation board |
STM8L1526-EVAL |
Evaluation board for STM8L15x/16x (32KB flash) ErnergyLite 8-bit MCUs |