• 简体中文
• English

LTC1049 - Low Power Zero-Drift Operational Amplifier with Internal Capacitors

The LTC1049 is a high performance, low power zero-drift operational amplifier. The two sample-and-hold capacitors usually required externally by other chopper stabilized amplifiers are integrated on the chip. Further, the LTC1049 offers superior DC and AC performance with a nominal supply current of only 200µA.

The LTC1049 has a typical offset voltage of 2µV, drift of 0.02µV/°C, 0.1Hz to 10Hz input noise voltage of 3µVP-P and typical voltage gain of 160dB. The slew rate is 0.8V/µs with a gain bandwidth product of 0.8MHz.

Overload recovery time from a saturation condition is 6ms, a significant improvement over chopper amplifiers using external capacitors.

The LTC1049 is available in a standard 8-pin plastic dual in line, as well as an 8-pin SO package. The LTC1049 can be a plug-in replacement for most standard op amps with improved DC performance and substantial power savings.

Features Low Supply Current: 200µA No External Components Required Maximum Offset Voltage: 10µV Maximum Offset Voltage Drift: 0.1µV/°C Single Supply Operation: 4.75V to 16V Input Common Mode Range Includes Ground Output Swings to Ground Typical Overload Recovery Time: 6ms Available in 8-Pin SO and PDIP Packages Typical Application

Applications 4mA to 20mA Current Loops Thermocouple Amplifiers Electronic Scales Medical Instrumentation Strain Gauge Amplifiers High Resolution Data Acquisition Packaging

Demo Boards