• 简体中文
• English

MAX2043：1700MHz to 3000MHz High-Linearity, Low LO Leakage Base-Station Rx/Tx Mixer

Fully Integrated Up/Downconverter Delivers 7.5dB of Conversion Loss, 31dBm of IIP3, 7.8dB of NF, 63dBc of 2LO - 2RF Rejection, and -52dBm LO - RF Leakage While Replacing a Passive Mixer, an LO Amp, Two Baluns, an LO Switch, Plus Dozens of Discrete Components

The MAX2043 high-linearity passive upconverter or downconverter mixer is designed to provide approximately +31dBm of IIP3, +67dBc of LO ± 2IF spurious rejection, 7.8dB of noise figure, 7.5dB of conversion loss, and -52dBm of LO leakage for UMTS/WCDMA, DCS, PCS, and WiMAX base-station applications. With a 1700MHz to 3000MHz RF frequency range and a 1900MHz to 3000MHz LO frequency range, this mixer is ideal for high-side LO injection architectures. In addition to offering excellent linearity and noise performance, the MAX2043 also yields a high level of component integration. The MAX2043 integrates baluns in the RF and LO ports, a dual-input LO-selectable switch, an LO buffer, and a double-balanced mixer. The on-chip baluns allow for a single-ended RF input for downconversion (or RF output for upconversion), and single-ended LO inputs. The MAX2043 requires a typical 0dBm LO drive, and supply current is rated at a typical 108mA level. The IF port is DC-coupled, making it ideal for direct conversion or modulation. As an upconverter, the device has low output noise floor of less than -160dBc/Hz (-160dBm/Hz when transmitting 0dBm linear RF power). The MAX2043 is available in a 36-pin thin QFN package (6mm x 6mm) with an exposed paddle. Electrical performance is guaranteed over the extended -40°C to +85°C temperature range.

Key Features +31dBm Typical 3rd-Order Input Intercept Point +23dBm Typical Input 1dB Compression Point 1700MHz to 3000MHz RF Frequency Range 1900MHz to 3000MHz LO Frequency Range DC to 350MHz IF Frequency Range 7.5dB Typical Conversion Loss 7.8dB Typical Noise Figure -160dBc/Hz LO Noise -52dBm LO Leakage at RF Port 67dBc LO ± 2IF Spurious Suppression -3dBm to +6dBm LO Drive +5V Single-Supply Operation Built-In SPDT LO Switch with 43dB LO1 to LO2 Isolation and 50ns Switching Time Internal RF and LO Baluns for Single-Ended Inputs External Current-Setting Resistor Provides Option for Operating Mixer in Reduced Power/Reduced Performance Mode Lead-Free Package Available

MAX2043: Typical Operating Circuit Applications/Uses cdmaOne™ and cdma2000® Base Stations DCS 1800 and EDGE Base Stations Digital and Spread-Spectrum Communication Systems Microwave Links PCS 1900 and EDGE Base Stations Point-to-Point Microwave Systems Private Mobile Radio UMTS/WCDMA and 3G Base Stations WiMAX™ Base Stations and Customer Premise Equipment Wireless Local Loop

DataSheet

Parametrics

Design kits & evaluation modules

• MAX2043EVKIT

Related Products

• MAX2029：High-Linearity, 815MHz to 1000MHz Upconversion/Downconversion Mixer with LO Buffer/Switch
• MAX9985：Dual, SiGe, High-Linearity, 700MHz to 1000MHz Downconversion Mixer with LO Buffer/Switch
• MAX2041：High-Linearity, 1700MHz to 3000MHz Upconversion/Downconversion Mixer with LO Buffer/Switch
• MAX9986A：SiGe High-Linearity, 815MHz to 1000MHz Downconversion Mixer with LO Buffer/Switch
• MAX2031：High-Linearity, 650MHz to 1000MHz Upconversion/Downconversion Mixer with LO Buffer/Switch
• MAX9984：SiGe High-Linearity, 400MHz to 1000MHz Downconversion Mixer with LO Buffer/Switch
• MAX9986：SiGe High-Linearity, 815MHz to 995MHz Downconversion Mixer with LO Buffer/Switch
• MAX9996：SiGe High-Linearity, 1700MHz to 2200MHz Downconversion Mixer with LO Buffer/Switch
• MAX2039：High-Linearity, 1700MHz to 2200MHz Upconversion/Downconversion Mixer with LO Buffer/Switch
• MAX9994：SiGe High-Linearity, 1400MHz to 2200MHz Downconversion Mixer with LO Buffer/Switch
• MAX9995：Dual, SiGe, High-Linearity, 1700MHz to 2700MHz Downconversion Mixer with LO Buffer/Switch
• MAX9993：High-Linearity 1700MHz to 2200MHz Down-Conversion Mixer with LO Buffer/Switch
• MAX9981：825MHz to 915MHz, Dual SiGe High-Linearity Active Mixer
• MAX9989：+14dBm to +20dBm LO Buffers with ±1dB Variation
• MAX9990：+14dBm to +20dBm LO Buffers with ±1dB Variation
• MAX9982：825MHz to 915MHz, SiGe High-Linearity Active Mixer
• MAX9987：+14dBm to +20dBm LO Buffers/Splitters with ±1dB Variation
• MAX9988：+14dBm to +20dBm LO Buffers/Splitters with ±1dB Variation

Ordering Information