MAX5864:Ultra-Low-Power, High-Dynamic-Performance, 22Msps Analog Front End

The MAX5864 ultra-low-power, highly integrated analog front end is ideal for portable communication equipment such as handsets, PDAs, WLAN, and 3G wireless terminals. The MAX5864 integrates dual 8-bit receive ADCs and dual 10-bit transmit DACs while providing the highest dynamic performance at ultra-low power. The ADCs' analog I-Q input amplifiers are fully differential and accept 1VP-P full-scale signals. Typical I-Q channel phase matching is ±0.1° and amplitude matching is ±0.03dB. The ADCs feature 48.5dB SINAD and 69dBc spurious-free dynamic range (SFDR) at fIN = 5.5MHz and fCLK = 22Msps. The DACs' analog I-Q outputs are fully differential with ±400mV full-scale output, and 1.4V common-mode level. Typical I-Q channel phase match is ±0.15° and amplitude match is ±0.05dB. The DACs also feature dual 10-bit resolution with 71.7dBc SFDR, and 57dB SNR at fOUT = 2.2MHz and fCLK = 22MHz. The ADCs and DACs operate simultaneously or independently for frequency-division duplex (FDD) and time-division duplex (TDD) modes. A 3-wire serial interface controls power-down and transceiver modes of operation. The typical operating power is 42mW at fCLK = 22Msps with the ADCs and DACs operating simultaneously in transceiver mode. The MAX5864 features an internal 1.024V voltage reference that is stable over the entire operating power-supply range and temperature range. The MAX5864 operates on a +2.7V to +3.3V analog power supply and a +1.8V to +3.3V digital I/O power supply for logic compatibility. The quiescent current is 5.6mA in idle mode and 1µA in shutdown mode. The MAX5864 is specified for the extended (-40°C to +85°C) temperature range and is available in a 48-pin thin QFN package. See a parametric table of the complete family of pin-compatible AFEs.

Key Features
  • Integrated Dual 8-Bit ADCs and Dual 10-Bit DACs
  • Ultra-Low Power
    • 42mW at fCLK = 22MHz (Transceiver Mode)
    • 34mW at fCLK = 15.36MHz (Transceiver Mode)
    • Low-Current Idle and Shutdown Modes
  • Excellent Dynamic Performance
    • 48.5dB SINAD at fIN = 5.5MHz (ADC)
    • 71.7dB SFDR at fOUT = 2.2MHz (DAC)
  • Excellent Gain/Phase Match
    • ±0.1° Phase, ±0.03dB Gain at fIN = 5.5MHz (ADC)
  • Internal/External Reference Option
  • +1.8V to +3.3V Digital Output Level (TTL/CMOS Compatible)
  • Multiplexed Parallel Digital Input/Output for ADCs/DACs
  • Miniature 48-Pin Thin QFN Package (7mm x 7mm)
  • Evaluation Kit Available (Order MAX5865EVKIT)
MAX5864: Functional Diagram
MAX5864: Functional Diagram
Applications/Uses
  • 3G Wireless Terminals
  • Fixed/Mobile Broadband Wireless Modems
  • Narrowband/Wideband CDMA Handsets
  • PDAs
DataSheet
titleDownload file
MAX5864 Data SheetMAX5864.pdf
Parametrics
Part NumberInput Chan.Conv. Speed
(Msps)
SNR
(dB)
Resolution
(bits)
Output Chan.Speed
(Msps)
SFDR
(dBc)
THD
(dBc)
Noise Spectral Density
(dBFS/Hz)
VSUPPLY
(V)
Package/PinsBudgetary
Price
ADCADC@ fINDACDACDAC@ fOUT@ fOUT@ fOUTSee Notes
MAX586422248.6 @ 5.5MHz1022271.7 @ 2.2MHz-70 @ 2.2MHz-128.4 @ 2.2MHz1.8
2.7 to 3.3
TQFN/48$5.65 @1k
Design kits & evaluation modules
Related Products
  • MAX5866:Ultra-Low-Power, High-Dynamic-Performance, 60Msps Analog Front End
  • MAX5863:Ultra-Low-Power, High-Dynamic Performance, 7.5Msps Analog Front End
  • MAX5865:Ultra-Low-Power, High-Dynamic-Performance, 40Msps Analog Front End
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX5864ETMNo Longer AvailableMAX5864ETM+TQFN,;48 pin;50.4 mm²-40°C to +85°CNo
MAX5864ETM+ActiveTQFN,;48 pin;50.4 mm²-40°C to +85°CLead Free
MAX5864ETM+TActiveTQFN,;48 pin;50.4 mm²-40°C to +85°CLead Free
MAX5864ETM-TNo Longer AvailableMAX5864ETM+TQFN;-40°C to +85°CSee data sheet
MAX5864.pdf MAX5864
MAX5864.pdf MAX5864