MAX7318:2-Wire-Interfaced, 16-Bit, I/O Port Expander with Interrupt and Hot-Insertion Protection

The MAX7318 2-wire-interfaced expander provides 16-bit parallel input/output (I/O) port expansion for SMBus™ and I²C applications. The MAX7318 consists of input port registers, output port registers, polarity inversion registers, configuration registers, and an I²C-compatible serial interface logic compatible with SMBus. The system master can invert the MAX7318 input data by writing to the active-high polarity inversion register. Any of the 16 I/O ports can be configured as an input or output. A power-on reset (POR) initializes the 16 I/Os as inputs. Three address select pins configure one of 64 slave ID addresses. The MAX7318 supports hot insertion. All port pins, the active-low INT output, SDA, SCL, and the slave address inputs AD0–2 remain high impedance in power-down (V+ = 0V) with up to 6V asserted upon them. The MAX7318 is available in 24-pin SO, SSOP, TSSOP, and thin QFN packages and is specified over the -40°C to +125°C automotive temperature range. For applications requiring an SMBus timeout function, refer to the MAX7311 data sheet.

Key Features
  • 400kbps I²C-Compatible Serial Interface
  • 2V to 5.5V Operation
  • 5.5V Overvoltage-Tolerant I/Os
  • Supports Hot Insertion
  • 16 I/O Pins that Default to Inputs on Power-Up
  • 100kΩ Pullup on Each I/O
  • Open-Drain Interrupt Output (Active-Low INT)
  • Noise Filter on SCL/SDA Inputs
  • 64 Slave ID Addresses Available
  • Low Standby Current (5.4µA typ)
  • Polarity Inversion
  • 4mm x 4mm, 0.8mm Thin QFN Package
  • -40°C to +125°C Operation
MAX7318: Block Diagram
MAX7318: Block Diagram
Applications/Uses
  • Industrial Control
  • Instrumentation and Test Measurement
  • Medical Equipment
  • PLCs
  • RAID Systems
  • Servers
DataSheet
titleDownload file
MAX7318 Data SheetMAX7318.pdf
Parametrics
Part NumberInterfaceI/OInterr.OutOver Voltage Protection
(V)
Drive Current
(mA)
VSUPPLY
(V)
VSUPPLY
(V)
Package/PinsBudgetary
Price
minmaxSee Notes
MAX7318Serial 2-Wire 400kbit16Yes5.54025.5SOIC(W)/24
SSOP/24
TQFN/24
TSSOP/24
$2.31 @1k
Design kits & evaluation modules
Quality and Environmental Data
Related Products
  • MAX7317:10-Port SPI-Interfaced I/O Expander with Overvoltage and Hot-Insertion Protection
  • MAX6964:17-Output LED Driver/GPO with Intensity Control and Hot-Insertion Protection
  • MAX7314:18-Port GPIO with LED Intensity Control, Interrupt, and Hot-Insertion Protection
  • MAX7316:10-Port I/O Expander with LED Intensity Control, Interrupt, and Hot-Insertion Protection
  • MAX7315:8-Port I/O Expander with LED Intensity Control, Interrupt, and Hot-Insertion Protection
  • MAX7313:16-Port I/O Expander with LED Intensity Control, Interrupt, and Hot-Insertion Protection
  • MAX7312:2-Wire-Interfaced 16-Bit I/O Port Expander with Interrupt and Hot-Insertion Protection
  • MAX6965:9-Output LED Driver with Intensity Control and Hot-Insertion Protection
  • MAX7311:2-Wire-Interfaced 16-Bit I/O Port Expander with Interrupt and Hot-Insertion Protection
  • MAX7310:2-Wire-Interfaced 8-Bit I/O Port Expander with Reset
  • MAX7300:2-Wire-Interfaced, 2.5V to 5.5V, 20-Port or 28-Port I/O Expander
  • MAX6956:2-Wire-Interfaced, 2.5V to 5.5V, 20-Port or 28-Port LED Display Driver and I/O Expander
  • MAX7301:4-Wire-Interfaced, 2.5V to 5.5V, 20-Port and 28-Port I/O Expander
  • MAX6957:4-Wire-Interfaced, 2.5V to 5.5V, 20-Port and 28-Port LED Display Driver and I/O Expander
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX7318AAGNo Longer AvailableMAX7318AAG+SSOP,;24 pin;65.8 mm²-40°C to +125°CNo
MAX7318AAG+ActiveSSOP,;24 pin;65.8 mm²-40°C to +125°CLead Free
MAX7318AAG+TActiveSSOP,;24 pin;65.8 mm²-40°C to +125°CLead Free
MAX7318AAG-TNo Longer AvailableMAX7318AAG+TSSOP;24 pin-40°C to +125°CSee data sheet
MAX7318ATGNo Longer AvailableMAX7318ATG+TQFN,;24 pin;16.8 mm²-40°C to +125°CNo
MAX7318ATG+ActiveTQFN,;24 pin;16.8 mm²-40°C to +125°CLead Free
MAX7318ATG+TActiveTQFN,;24 pin;16.8 mm²-40°C to +125°CLead Free
MAX7318ATG-TNo Longer AvailableMAX7318ATG+TQFN;24 pin-40°C to +125°CSee data sheet
MAX7318AUGNo Longer AvailableMAX7318AUG+TSSOP,;24 pin;52.4 mm²-40°C to +125°CNo
MAX7318AUG+ActiveTSSOP,;24 pin;52.4 mm²-40°C to +125°CLead Free
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX7318AUG+TActiveTSSOP,;24 pin;52.4 mm²-40°C to +125°CLead Free
MAX7318AUG-TNo Longer AvailableMAX7318AUG+TTSSOP;24 pin-40°C to +125°CSee data sheet
MAX7318AWGNo Longer AvailableMAX7318AWG+SOIC(W),;24 pin;166.1 mm²-40°C to +125°CNo
MAX7318AWG+ActiveSOIC(W),;24 pin;166.1 mm²-40°C to +125°CLead Free
MAX7318AWG+TActiveSOIC(W),;24 pin;166.1 mm²-40°C to +125°CLead Free
MAX7318AWG-TNo Longer AvailableMAX7318AWG+TW.SO;24 pin-40°C to +125°CSee data sheet
MAX7318.pdf MAX7318
MAX7318.pdf MAX7318
MAX7318.pdf MAX7318
Driving LEDs with Push-Pull Port Expander Outputs MAX7318
MAX7318.pdf MAX7318
MAX7318.pdf MAX7318