MCP2003B

Stand-alone LIN Transceiver -- MCP2003B supports a wide range of packages; 8-pin 2x3 DFN, 3x3 DFN and and SOIC

This device provides a bidirectional, half-duplex communication, physical interface to automotive and industrial LIN systems to meet the LIN Bus Specification Revision 2.2, SAE J2602, and ISO 17987. The device is both short-circuit and overtemperature protected by internal circuitry. The device has been specifically designed to operate in the automotive operating environment and will survive all specified transient conditions while meeting all of the stringent quiescent current requirements.

Features
  • The MCP2003B is Compliant with Local Interconnect Network (LIN) Bus Specifications 1.3, 2.0, 2.1, 2.2, SAE J2602, and ISO17987
  • Supports Baud Rates up to 20 Kbaud with LIN-Compatible Output Driver
  • 60V Load Dump Protected
  • Very High Electromagnetic Immunity (EMI) Meets Stringent Original Equipment Manufacturers (OEM) Requirements
  • Direct Capacitor Coupling Robustness without Transient Voltage Suppressor (TVS): ±35V on LBUS (SAE J2962-1) ±85V on LBUS (SAE J2962-1)
  • ±35V on LBUS (SAE J2962-1)
  • ±85V on LBUS (SAE J2962-1)
  • High Electrostatic Discharge (ESD) Immunity without TVS: >25kV on LBUS (SAE J2962-1) >15kV on VBB (IEC 61000-4-2) >6 kV on LBUS (IEC 61000-4-2)
  • >25kV on LBUS (SAE J2962-1)
  • >15kV on VBB (IEC 61000-4-2)
  • >6 kV on LBUS (IEC 61000-4-2)
  • Very High Immunity to RF Disturbances Meets Stringent OEM Requirements
  • Wide Supply Voltage: 5.5V – 30.0V Continuous
  • Extended (E) Temperature Range: -40°C to +125°C
  • High (H) Temperature Range: -40°C to +150°C
  • Interfaces to PIC® MCU EUSART and Standard USARTs
  • LIN Bus Pin: Internal pull-up resistor and diode Protected against battery shorts Protected against loss of ground High current drive: >40 mA
  • Internal pull-up resistor and diode
  • Protected against battery shorts
  • Protected against loss of ground
  • High current drive: >40 mA
  • Automatic Thermal Shutdown
  • Low-Power Mode (@ 5 μA)
Parameter
Parameter Name Value Value
Description LIN Transceiver LIN Transceiver
Vreg Output Voltage Options (V) - -
Max. Baud Rate (kBaud) 20 20
Vcc Range (V) 6 to 30 6 to 30
Documents
MCP2003B Data SheetData Sheets04/27/2016892KB
TB3150 - MCP2003A to MCP2003B MigrationTech Briefs01/20/2016108KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MCP2003B-E/MC8DFN-40C to +125CTUBE0.710.590.540.520.52
MCP2003B-E/MF8DFN-40C to +125CTUBE0.710.590.540.520.52
MCP2003B-E/SN8SOIC-40C to +125CTUBE0.670.560.510.490.49
MCP2003B-H/MC8DFN-40C to >+125CTUBE0.750.630.570.550.54
MCP2003B-H/MF8DFN-40C to >+125CTUBE0.750.630.570.550.54
MCP2003B-H/SN8SOIC-40C to >+125CTUBE0.710.590.540.520.52
MCP2003BT-E/MC8DFN-40C to +125CT/R0.710.590.540.520.52
MCP2003BT-E/MF8DFN-40C to +125CT/R0.710.590.540.520.52
MCP2003BT-E/SN8SOIC-40C to +125CT/R0.670.560.510.490.49
MCP2003BT-H/MC8DFN-40C to >+125CT/R0.750.630.570.550.54
MCP2003BT-H/MF8DFN-40C to >+125CT/R0.750.630.570.550.54
MCP2003BT-H/SN8SOIC-40C to >+125CT/R0.710.590.540.520.52
Similar Devices
ProductVcc RangeVreg Output Voltage VLIN Spec SupportedPrice5K
MCP20036 - 271.3, 2.0, 2.1, SAEJ2602$0.64
MCP2003A6 - 271.3, 2.0, 2.1, SAEJ2602$0.60
MCP2003B6 - 30-1.3, 2.0, 2.1, SAEJ2602, ISO17987$0.49
MCP20046 - 271.3, 2.0, 2.1, SAEJ2602$0.64
MCP2004A6 - 271.3, 2.0, 2.1, SAEJ2602$0.60
MCP20215.5 - 183.3 - 5.0Rev 1.3, 2.0, 2.1, SAE J2602$0.91
MCP2021A6 - 183.3 - 5.01.3, 2.0, 2.1, SAE J2602$0.89
MCP20225.5 - 183.3 - 5.0Rev 1.3, 2.0, 2.1, SAE J2602$1.01
MCP2022A6 - 183.3 - 5.01.3, 2.0, 2.1, SAE J2602$0.89
MCP20256 - 183.3 - 5.01.3, 2.0, 2.1, SAE J2602$0.89
MCP20506 - 183.3 - 5.01.3, 2.0, 2.1, SAE J2602$1.05
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MCP2003B-E/SN0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
MCP2003BT-E/SN0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
MCP2003B-H/SN0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
MCP2003BT-H/SN0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
MCP2003B-E/SNVAO0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
MCP2003BT-E/SNVAO0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
MCP2003B-E/MF0.0238000.0416678DFN3x3x0.9mmMatte Tine3
MCP2003BT-E/MF0.0238000.1727278DFN3x3x0.9mmMatte Tine3
MCP2003B-H/MF0.0238000.0416678DFN3x3x0.9mmMatte Tine3
MCP2003BT-H/MF0.0238000.1727278DFN3x3x0.9mmMatte Tine3
MCP2003BT-E/MC0.0170000.1306068DFN2x3x0.9mmMatte Tine3
MCP2003B-H/MC0.0170000.0333338DFN2x3x0.9mmMatte Tine3
MCP2003BT-H/MC0.0170000.1306068DFN2x3x0.9mmMatte Tine3
MCP2003B-E/MC0.0170000.0333338DFN2x3x0.9mmMatte Tine3
MCP2003B Data Sheet MCP2003B
TB3150 - MCP2003A to MCP2003B Migration MCP2003B