MCP2022

Please consider this device

The MCP2022 provides a bidirectional, half-duplex communication physical interface to an automotive and industrial Local Interconnect (LIN) and SAE J2602 bus. Operation covers LIN Bus Specification Versions 1.3, 2.0, 2.1 and SAE J2602. The device incorporates a voltage regulator with 5V/50mA or 3.3V/50mA output. The regulator is short-circuit protected and also includes thermal shutdown. The regulator has been specifically designed to operate in the automotive environment and will survive reverse battery conditions, +43V load dump transients and double-battery jump starts. The device has been designed to meet the stringent quiescent current requirements of the automotive industry. The devices' very low emissions, excellent robustness to automotive transients and very high ESD robustness have been confirmed by independent test authorities.

Features
  • Physical Layer Transceiver interface to support LIN Bus Specifications Version 1.3, 2.0, 2.1 and SAE J2602
  • LIN Bus pin with internal pull-up resistor and diode protect against ground shorts and loss of ground
  • Wake Up through LIN Bus activity (filtered) or LWAKE pin
  • Thermal shutdown protection
  • Built-in Voltage Regulator with wide operating voltage range up to 30V and regulation range from 5.5V to 18V
  • Load dump protection up to 43V
  • RESET Output
  • MCP2022 available in 14-pin PDIP, SOIC and TSSOP packages -MCP2022-330 with 3.3V regulator -MCP2022-500 with 5V regulator
  • Extended temperature range: -40°C to +125°C
  • Automotive Qualification Physical Layer Transceiver interface to support LIN Bus Specifications Version 1.3, 2.0, 2.1 and SAE J2602 LIN Bus pin with internal pull-up resistor and diode protect against ground shorts and loss of ground Wake Up through LIN Bus activity (filtered) or LWAKE pin Thermal shutdown protection Built-in Voltage Regulator with wide operating voltage range up to 30V and regulation range from 5.5V to 18V Load dump protection up to 43V MCP2022 available in 8-pin DPIP, SOIC and DFN packagesMCP2022-330 with 3.3V regulator MCP2022-500 with 5V regulator Extended temperature range: -40°C to +125°C Automotive QualificationAlso see:LIN Software Libraries
  • Physical Layer Transceiver interface to support LIN Bus Specifications Version 1.3, 2.0, 2.1 and SAE J2602
  • LIN Bus pin with internal pull-up resistor and diode protect against ground shorts and loss of ground
  • Wake Up through LIN Bus activity (filtered) or LWAKE pin
  • Thermal shutdown protection
  • Built-in Voltage Regulator with wide operating voltage range up to 30V and regulation range from 5.5V to 18V
  • Load dump protection up to 43V
  • MCP2022 available in 8-pin DPIP, SOIC and DFN packagesMCP2022-330 with 3.3V regulator MCP2022-500 with 5V regulator
  • MCP2022-330 with 3.3V regulator
  • MCP2022-500 with 5V regulator
  • Extended temperature range: -40°C to +125°C
  • Automotive Qualification
Parameter
Parameter Name Value Value
Description LIN Transceiver with integrated Vreg LIN Transceiver with integrated Vreg
Vreg Output Voltage Options (V) 3.3 - 5.0 3.3 - 5.0
Vreg Output Current (mA) 50 50
Max. Baud Rate (kBaud) 20 20
Vcc Range (V) 5.5 to 18 5.5 to 18
Integrated VREG Yes Yes
Documents
MCP2021/2/1P/2P LIN Transceiver with Voltage RegulatorData Sheets07/17/20142019KB
AN1009 - LIN 2.0 Compliant Driver Using the PIC18XXXX Family MicrocontrollersAppNote04/26/2011298KB
AN1075 - Migrating Designs from MCP201 to MCP2021-500AppNote03/01/2007365KB
AN1099 - LIN 2.0 Compliant Driver Using the PIC16FXXX Family MicrocontrollersAppNote04/06/2011404KB
Migrating Designs from MCP202X to MCP202XA - AN1442 - Migrating Designs from MCP202X to MCP202XAAppNote03/15/2013101KB
Analog Solutions for Automotive Applications Design GuideBrochures12/08/2009284KB
Automotive Recommended Product Selector GuideBrochures09/16/20147598KB
Quick Guide to Microchip Development ToolsBrochures10/15/201411223KB
LIN Serial Analyzer Update v2.03Software01/15/2009457KB
Analog & Interface Product Selector GuideProduct Line Card03/21/20164116KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MCP2022-330E/P14PDIP-40C to +125CTUBE1.431.191.081.051.03
MCP2022-330E/SL14SOIC-40C to +125CTUBE1.431.191.081.051.03
MCP2022-330E/ST14TSSOP-40C to +125CTUBE1.571.311.191.151.13
MCP2022-500E/P14PDIP-40C to +125CTUBE1.401.161.061.021.01
MCP2022-500E/SL14SOIC-40C to +125CTUBE1.401.161.061.021.01
相关开发工具
Similar Devices
ProductVcc RangeVreg Output Voltage VLIN Spec SupportedPrice5K
MCP20036 - 271.3, 2.0, 2.1, SAEJ2602$0.64
MCP2003A6 - 271.3, 2.0, 2.1, SAEJ2602$0.60
MCP2003B6 - 30-1.3, 2.0, 2.1, SAEJ2602, ISO17987$0.49
MCP20046 - 271.3, 2.0, 2.1, SAEJ2602$0.64
MCP2004A6 - 271.3, 2.0, 2.1, SAEJ2602$0.60
MCP20215.5 - 183.3 - 5.0Rev 1.3, 2.0, 2.1, SAE J2602$0.91
MCP2021A6 - 183.3 - 5.01.3, 2.0, 2.1, SAE J2602$0.89
MCP20225.5 - 183.3 - 5.0Rev 1.3, 2.0, 2.1, SAE J2602$1.01
MCP2022A6 - 183.3 - 5.01.3, 2.0, 2.1, SAE J2602$0.89
MCP20256 - 183.3 - 5.01.3, 2.0, 2.1, SAE J2602$0.89
MCP20506 - 183.3 - 5.01.3, 2.0, 2.1, SAE J2602$1.05
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MCP2022-500E/P0.9533001.83333314PDIP.300inMatte Tine3
MCP2022-330E/P0.9533001.83333314PDIP.300inMatte Tine3
MCP2022A-330E/P0.9533001.83333314PDIP.300inMatte Tine3
MCP2022A-500E/P0.9533001.83333314PDIP.300inMatte Tine3
MCP2022-500E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP2022T-500E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP2022T-330E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP2022-330E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP2022AT-330E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP2022A-330E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP2022A-500E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP2022AT-500E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP2022PT-330E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP2022P-330E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP2022P-500E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP2022PT-500E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP2022-500E/SL0.1432000.28070214SOIC.150In(3.90mm)Matte Tine3
MCP2022T-330E/SL0.1432000.32500014SOIC.150In(3.90mm)Matte Tine3
MCP2022T-500E/SL0.1432000.32500014SOIC.150In(3.90mm)Matte Tine3
MCP2022-330E/SL0.1432000.28070214SOIC.150In(3.90mm)Matte Tine3
MCP2022AT-330E/SL0.1432000.32500014SOIC.150In(3.90mm)Matte Tine3
MCP2022A-330E/SL0.1432000.28070214SOIC.150In(3.90mm)Matte Tine3
MCP2022A-500E/SL0.1432000.28070214SOIC.150In(3.90mm)Matte Tine3
MCP2022AT-500E/SL0.1432000.32500014SOIC.150In(3.90mm)Matte Tine3
MCP2022P-330E/SL0.1432000.28070214SOIC.150In(3.90mm)Matte Tine3
MCP2022PT-330E/SL0.1432000.32500014SOIC.150In(3.90mm)Matte Tine3
MCP2022PT-500E/SL0.1432000.32500014SOIC.150In(3.90mm)Matte Tine3
MCP2022P-500E/SL0.1432000.28070214SOIC.150In(3.90mm)Matte Tine3
MCP2021/2/1P/2P LIN Transceiver with Voltage Regulator MCP2022
AN1009 MCP2022
AN1075 MCP2022
AN1099 MCP2022
Migrating Designs from MCP202X to MCP202XA MCP2022
Analog Solutions for Automotive Applications Design Guide MCP2022
Automotive Recommended Product Selector Guide MCP23S09
Quick Guide to Microchip Development Tools ENC28J60
LIN Serial Analyzer Update v2.03 MCP2022
Analog & Interface Product Selector Guide ENC624J600