MCP2022A

The MCP2022A provides a bidirectional, half-duplex communication physical interface to an automotive and industrial Local Interconnect (LIN) and SAE J2602 bus. Operation covers LIN Bus Specification Versions 1.3, 2.0, 2.1 and SAE J2602. The device incorporates a voltage regulator with 5V/50mA or 3.3V/70mA output. The regulator is short-circuit protected and also includes thermal shutdown. The regulator has been specifically designed to operate in the automotive environment and will survive reverse battery conditions, +43V load dump transients and double-battery jump starts. The device has been designed to meet the stringent quiescent current requirements of the automotive industry. The devices' very low emissions, excellent robustness to automotive transients and very high ESD robustness have been confirmed by independent test authorities.

Features
  • Physical Layer Transceiver interface to support LIN Bus Specifications Version 1.3, 2.0, 2.1 and SAE J2602
  • Integrated 3.3V or 5.0V Vreg with output current of 70mA and current limit greater than 250mA
  • ESD performance on Vbb & LIN pins > 15KV (IEC 61000-4-2)
  • Meets stringent auto requirements including “OEM Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications”, Version 1.2, March 2011
  • Typical powerdown current < 4.5uA
  • MCP2022A available in 8-pin PDIP, SOIC and DFN packagesMCP2022A-330 with 3.3V regulator MCP2022A-500 with 5V regulator
  • MCP2022A-330 with 3.3V regulator
  • MCP2022A-500 with 5V regulator
  • Extended temperature range: -40°C to +125°C
Parameter
Parameter Name Value Value
Description LIN Transceiver with integrated Vreg LIN Transceiver with integrated Vreg
Vreg Output Voltage Options (V) 3.3 - 5.0 3.3 - 5.0
Vreg Output Current (mA) 70 70
Max. Baud Rate (kBaud) 20 20
Vcc Range (V) 6 to 18 6 to 18
Integrated VREG Yes Yes
Documents
MCP2021A/MCP2022A Data SheetData Sheets08/07/20141856KB
Migrating Designs from MCP201 to MCP2021AMigration Documents05/15/2012148KB
Migrating Designs from MCP202X to MCP202XA - AN1442 - Migrating Designs from MCP202X to MCP202XAAppNote03/15/2013101KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MCP2022A-330E/P14PDIP-40C to +125CTUBE1.231.020.930.900.89
MCP2022A-330E/SL14SOIC-40C to +125CTUBE1.391.161.061.021.01
MCP2022A-330E/ST14TSSOP-40C to +125CTUBE1.531.271.161.121.11
MCP2022A-500E/P14PDIP-40C to +125CTUBE1.231.020.930.900.89
MCP2022A-500E/SL14SOIC-40C to +125CTUBE1.391.161.061.021.01
MCP2022A-500E/ST14TSSOP-40C to +125CTUBE1.531.271.161.121.11
MCP2022AT-330E/SL14SOIC-40C to +125CT/R1.391.161.061.021.01
MCP2022AT-330E/ST14TSSOP-40C to +125CT/R1.531.271.161.121.11
MCP2022AT-500E/SL14SOIC-40C to +125CT/R1.391.161.061.021.01
MCP2022AT-500E/ST14TSSOP-40C to +125CT/R1.531.271.161.121.11
Similar Devices
ProductVcc RangeVreg Output Voltage VLIN Spec SupportedPrice5K
MCP20036 - 271.3, 2.0, 2.1, SAEJ2602$0.64
MCP2003A6 - 271.3, 2.0, 2.1, SAEJ2602$0.60
MCP2003B6 - 30-1.3, 2.0, 2.1, SAEJ2602, ISO17987$0.49
MCP20046 - 271.3, 2.0, 2.1, SAEJ2602$0.64
MCP2004A6 - 271.3, 2.0, 2.1, SAEJ2602$0.60
MCP20215.5 - 183.3 - 5.0Rev 1.3, 2.0, 2.1, SAE J2602$0.91
MCP2021A6 - 183.3 - 5.01.3, 2.0, 2.1, SAE J2602$0.89
MCP20225.5 - 183.3 - 5.0Rev 1.3, 2.0, 2.1, SAE J2602$1.01
MCP2022A6 - 183.3 - 5.01.3, 2.0, 2.1, SAE J2602$0.89
MCP20256 - 183.3 - 5.01.3, 2.0, 2.1, SAE J2602$0.89
MCP20506 - 183.3 - 5.01.3, 2.0, 2.1, SAE J2602$1.05
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MCP2022A-330E/P0.9533001.83333314PDIP.300inMatte Tine3
MCP2022A-500E/P0.9533001.83333314PDIP.300inMatte Tine3
MCP2022AT-330E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP2022A-330E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP2022A-500E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP2022AT-500E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP2022AT-330E/SL0.1432000.32500014SOIC.150In(3.90mm)Matte Tine3
MCP2022A-330E/SL0.1432000.28070214SOIC.150In(3.90mm)Matte Tine3
MCP2022A-500E/SL0.1432000.28070214SOIC.150In(3.90mm)Matte Tine3
MCP2022AT-500E/SL0.1432000.32500014SOIC.150In(3.90mm)Matte Tine3
MCP2021A/MCP2022A Data Sheet MCP2022A
Migrating Designs from MCP201 to MCP2021A MCP2022A
Migrating Designs from MCP202X to MCP202XA MCP2022A