LTC1064-3 - Low Noise, High Frequency, 8th Order Linear Phase Lowpass Filter

The LTC®1064-3 is a monolithic 8th order lowpass Bessel filter, which provides a linear phase response over its entire passband. An external TTL or CMOS clock programs the filter?s cutoff frequency. The clock to cutoff frequency ratio is 75:1 (Pin 10 at V+) or 150:1 (Pin 10 at V?) or 120:1 (Pin 10 at GND). The maximum cutoff frequency is 95kHz. No external components are needed.

The LTC1064-3 features low wideband noise and low harmonic distortion even for input voltages up to 3VRMS. In fact the LTC1064-3 overall performance competes with equivalent multiple op amp RC active realizations. The LTC1064-3 is available in a 14-pin DIP or 16-pin surface mounted SOL package. The LTC1064-3 is fabricated using LTC?s enhanced analog CMOS Si-gate process.

The LTC1064-3 is pin compatible with the LTC1064-1, LTC1064-2 and LTC1064-4.

  • 8th Order Filter in a 14-Pin Package
  • 95kHz Maximum Corner Frequency
  • No External Components
  • 75:1, 150:1, and 120:1 Clock to Cutoff Frequency Ratio
  • 60µVRMS Total Wideband Noise
  • 0.03% THD or Better
  • Operates from ±2.37V to ±8V Power Supplies
  • Low Total Output DC Offset
Typical Application
LTC1064-3 Typical Application
LTC1064-3 Typical Application
  • Antialiasing Filters
  • Smoothing Filters
  • Tracking High Frequency Lowpass Filters
LTC1064-3 Package Drawing
LTC1064-3 Package Drawing
Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
Application Note
Reliability Data
CAD Symbol
Related Products
LTC1064-3 - Low Noise, High Frequency, 8th Order Linear Phase Lowpass Filter
AN40 - Take the Mystery Out of the Switched Capacitor Filter
AN56 - Better than Bessel Linear Phase Filters For Data Communications
R042 Reliability Data
LTC1064-3 Footprints and Symbols