• 简体中文
• English

STM8TL53F4：8-bit, ultra-low-power, touch-sensing MCUs with 16-Kbyte Flash and proximity detection

The STM8TL52x4 and STM8TL53x4 devices feature the enhanced STM8 CPU core providing increased processing power (up to 16 MIPS at 16 MHz) while maintaining the advantages of a CISC architecture with improved code density, a 24-bit linear addressing space and an optimized architecture for low power operations. It uses a ProxSense charge transfer capacitive acquisition method that is capable of near range proximity detection.

The family includes an integrated debug module with a hardware interface (SWIM) which allows non-intrusive in-application debugging and ultrafast Flash programming. All STM8TL52x4 and STM8TL53x4 microcontrollers feature low-power low-voltage single-supply program Flash memory.

The STM8TL52x4 and STM8TL53x4 devices are based on a generic set of state-of-the-art peripherals. The modular design of the peripheral set allows the same peripherals to be found in different ST microcontroller families including 32-bit families. This makes any transition to a different family very easy, and simplified even more by the use of a common set of development tools.

Key Features

• Operating conditions
  • Operating power supply: 1.65 V to 3.6 V
  • Temperature range: –40 °C to 85 °C
• Low power features
  • 4 low power modes: Wait, Active-halt with AWU (1 μA), Active-halt with ProxSense™ (10 μA with scan every 200 ms),Halt (0.4 μA)
  • Dynamic power consumption: 150 μA/MHz
  • Fast wakeup from Halt mode: 4.7 μs
  • Ultra-low leakage per I/O: 50 nA
• Advanced STM8 Core
  • Harvard architecture with 3-stage pipeline
  • Max freq.16 MHz,16 CISC MIPS peak
• Memories
  • Up to 16 Kbyte of Flash program including up to 2 Kbyte of data EEPROM
  • Error correction code (ECC)
  • Flexible write and read protection modes
  • In-application and in-circuit programming
  • Data EEPROM capability
  • 4 Kbyte of static RAM
• Clock management
  • Internal 16 MHz factory-trimmed RC
  • Internal 38 kHz low consumption RC driving both the IWDG and the AWU
• Reset and supply management
  • Ultra-low-power, ultra safe power-on reset/ power-down reset
• Interrupt management
  • Nested interrupt controller with software priority control
  • Up to 22 external interrupt sources
• I/Os
  • Up to 23 with 22 mappable on external interrupt vectors
  • I/Os with programmable input pull-ups, high sink/source capability
• ProxSense™ patented acquisition technology with up to 300 touch sensing channels (20 receiver/transmitter channels and 15 transmitter channels) supporting projected capacitive acquisition method suitable for proximity detection.
• Timers
  • Two 16-bit general purpose timers (TIM2 and TIM3) with up and down counter and two channels (used as IC, OC, PWM)
  • One 8-bit timer (TIM4) with 7-bit prescaler
  • Independent watchdog
  • Window watchdog
  • Auto-wakeup unit
  • Beeper timer with 1, 2 or 4 kHz frequencies
• Communication interfaces
  • SPI synchronous serial interface
  • Fast I2C Multimaster/slave 400 kHz
  • USART with fractional baud rate generator
• Development support
  • Hardware single wire interface module (SWIM)
  • In-circuit emulation (ICE)

Product Specifications

Application Notes

Technical Notes & Articles

Reference Manuals

Programming Manuals

Errata Sheets

Presentations

Flyers

Hardware Development Tools

Software Development Tools

MCUs Embedded Software

Sample & Buy

Quality & Reliability