凌力尔特提供的热插拔控制器IC可限制浪涌电流、在正常操作期间实施电流限制，并提供了其他的监控功能。其应用包括 -48V 或 +48V 电信和网络、以太网供电 (PoE)、ATCA、PCI、CompactPCI 和低电压电源排序。
热插拔| Product | Circuit Breakers (#) | Vin Range | Circuit Breaker Threshold | Circuit Breaker Accuracy (%) | Active Limiting (yes/no) | ADC | Comments | Packages |
| LT1640A | 1 | -10 to -80 | 50mV | 20 | no | - | High voltage controller for -48V DC/DC modules. Improved drain pin ruggedness. Power Good active high | SO-8 |
| LT1640A | 1 | -10 to -80 | 50mV | 20 | no | - | High voltage controller for -48V DC/DC modules. Improved drain pin ruggedness. Power Good active low | SO-8 |
| LT4220 | 2 | 卤2.7 to 卤16.5 | 48mV, -52mV | 17 | yes | Controls positive and negative voltages. Selectable tracking mode | SSOP-16 | |
| LT4250 | 1 | -18 to -80 | 50mV | 20 | yes | - | Negative 48V Hot Swap Controller, designed for modules with a high enable input | SO-8 |
| LT4250 | 1 | -18 to -80 | 50mV | 20 | yes | - | Negative 48V Hot Swap Controller, designed for modules with a low enable input | SO-8 |
| LT4254 | 1 | 10.8 to 36 | 50mV | 20 | yes | - | Positive high voltage hot swap controller with open circuit detect output | SSOP-16 |
| LT4256-1 | 1 | 10.8 to 80 | 55mV | 18 | yes | - | Positive high voltage hot swap. Pin-compatible with LT1641. Latch-Off (LT4256-1) or auto-retry (LT4256-2) operation | SO-8 |
| LT4256-2 | 1 | 10.8 to 80 | 55mV | 18 | yes | - | Positive high voltage hot swap. Pin-compatible with LT1641. Latch-Off (LT4256-1) or auto-retry (LT4256-2) operation | SO-8 |
| LT4256-3 | 1 | 10.8 to 80 | 55mV | 18 | yes | - | Positive high voltage hot swap controller with open circuit detect output. Higher voltage version of LT4254 | SSOP-16 |
| LT4356-1_-2 | 1 | 4V to 80V | 50mV | 10 | yes | - | Surge Stopper, Auto Retry, Shutdown reduces quiescent current to 7uA | DFN-12, MS-10, SO-16 |
| LT4356-1_-2 | 1 | 4V to 80V | 50mV | 10 | yes | - | Surge Stopper, Auto Retry, Shutdown reduces quiescent current to 60uA, keeps the reference and auxiliary amplifier functioning | DFN-12, SO-16 |
| LT4356-3 | 1 | 4V to 80V | 50mV | 10 | yes | - | Surge Stopper with Fault Latchoff, Shutdown reduces quiescent current to 7uA | DFN-12, MS-10, SO-16 |
| LT4356MP | 1 | 4V to 80V | 50mV | 15 | yes | - | Surge Stopper, Guaranteed -55掳C to 125掳C Operation, Shutdown reduces quiescent current to 7uA | MS-10, SO-16 |
| LT4356MP | 1 | 4V to 80V | 50mV | 15 | yes | - | Surge Stopper, Guaranteed -55掳C to 125掳C Operation, Shutdown reduces quiescent current to 60uA | MS-10, SO-16 |
| LT4363 | 1 | 4V to 80V | 50mV | 14 | yes | - | High Voltage Surge Stopper with Current Limit | DFN-12, MS-12, SO-16 |
| LTC1421 | 2 | (2) 2.6 to 13.2, (1) -5 to -12 | 50mV | 20 | no | Controls a third supply for -12V without a circuit breaker. Reset and power good outputs, connection sense inputs | SW-24, SSOP-24 | |
| LTC1421 | 2 | (2) 2.6 to 13.2 (1) -5 to -12 | 50mV | 20 | no | Controls a third supply for -12V without a circuit breaker. Reset and power good outputs, connection sense inputs | SW-24, SSOP-24 | |
| LTC1422 | 1 | 2.55 to 13.2 | 50mV | 28 | no | System reset, programmable current limit | SO-8 | |
| LTC1642 | 1 | 2.97 to 16.5 | 52.5mV | 20 | yes | Protected against surges to 33V, output driver for SCR | SSOP-16 | |
| LTC1642A | 1 | 2.97V to 16.5 | 52.5mV | 20 | yes | Protected against surges to 33V, output driver for SCR | SSOP-16 | |
| LTC1643A | 4 | 3.3, 5, 卤12 | 53mV | 24.5 | yes | Controls 3.3V and 5V with N-Channel FETs, 卤12V supplies controlled with internal switches for PCI and CompactPCI | SSOP-16 | |
| LTC1644 | 4 | 3.3, 5, 卤12 | 55mV | 27 | yes | 3.3V, 5V and 卤12V supplies for CompactPCI, LOCAL_PCI_RST# logic, 1V precharge for data bus | SSOP-20 | |
| LTC1645 | 2 | (1) 1.18 to 13.2, (1) 2.3 to 13.2 | 50mV | 12 | no | Power Supply Sequencing, Reset, Fault outputs and spare comparator in 14-pin version | SO-8, SO-14 | |
| LTC1646 | 2 | 2.7 to 7 | 56mV | 16 | yes | 3.3V and 5V supplies for CompactPCI, LOCAL_PCI_RST# logic, 1V precharge for data bus | SSOP-16 | |
| LTC1647 | 2 | 2.7 to 16.5 | 50mV | 20 | no | Dual Hot Swap controller with a common VCC pin, separate ON pins | SO-8 | |
| LTC1647 | 2 | 2.7 to 16.5 | 50mV | 20 | no | Dual Hot Swap controller, combines a fault status flag with automatic retry at the ON pins | SO-8 | |
| LTC1647 | 2 | 2.7 to 16.5 | 50mV | 20 | no | Dual Hot Swap controller with individual VCC pins, ON pins and FAULT status pins for each channel | SSOP-16 | |
| LTC4210-1 | 1 | 2.7 to 16.5 | 50mV | 12 | yes | Active current limiting with circuit breaker. Automatic retry (4210-1) and latch-off (4210-2) on an overcurrent fault | SOT-23 | |
| LTC4210-2 | 1 | 2.7 to 16.5 | 50mV | 12 | yes | Active current limiting with circuit breaker. Automatic retry (4210-1) and latch-off (4210-2) on an overcurrent fault | SOT-23 | |
| LTC4210-3_-4 | 1 | 2.7V to 7V | 50mV | 12 | yes | Hot Swap Controller in 6-Lead SOT-23 Package, Auto Retry After Fault | SOT-23 | |
| LTC4210-3_-4 | 1 | 2.7V to 7V | 50mV | 12 | yes | Hot Swap Controller in 6-Lead SOT-23 Package, Latch Off After Fault | SOT-23 | |
| LTC4211 | 1 | 2.5 to 16.5 | 50mV | 20 | no | Active current limiting on in-rush, timed circuit breaker or fast response to catastrophic faults | SO-8, MS-8, MS-10 | |
| LTC4212 | 1 | 2.5 to 16.5 | 50mV | 20 | no | Power Good Input with Timer and Glitch Filter for assuring proper powering-up and monitoring of DC/DC converters | MS-10 | |
| LTC4213 | 1 | 0 to 6 | 25mV, 50mV, 100mV | 10 | no | No RSENSE Electronic Circuit Breaker | DFN-8 | |
| LTC4214 | 1 | -6 to -16 | 50mV | 12 | yes | Multilevel current limiting, controls -5V supplies if positive supply is available. Latch Off After Fault | MS-10 | |
| LTC4214 | 1 | -6 to -16 | 50mV | 12 | yes | Multilevel current limiting, controls -5V supplies if positive supply is available. Automatic Retry After Fault | MS-10 | |
| LTC4215 | 1 | 2.9V to 15V | 25mV | 10 | yes | 8-bit | I2C Internal 8-Bit ADC Measure Current, Voltage, 20渭s (LTC4215) Circuit Breaker Timeout | QFN-24, SSOP-16 |
| LTC4215-1_-3 | 1 | 2.9V to 15V | 25mV | 10 | yes | 8-bit | I2C Internal 8-Bit ADC Measure Current, Voltage, Circuit Breaker Timeout: 20渭s (LTC4215-1) | QFN-24 |
| LTC4215 | 1 | 2.9V to 15V | 25mV | 10 | yes | 8-bit | I2C Internal 8-Bit ADC Measure Current, Voltage, 420渭s (LTC4215-2) Circuit Breaker Timeout | QFN-24, SSOP-16 |
| LTC4215-1_-3 | 1 | 2.9V to 15V | 25mV | 10 | yes | 8-bit | I2C Internal 8-Bit ADC Measure Current, Voltage, Circuit Breaker Timeout: 420渭s (LTC4215-3) | QFN-24 |
| LTC4216 | 1 | 0V to 6V | 25mV | 14 | yes | 0V to 6V load voltages, active current limiting on in-rush, 2.3V to 6V bias voltage required, timer and glitch filter | DFN-12, MS-10 | |
| LTC4217 | 1 | 2.9V to 26.5V | 2A | 7.5 | yes | 2A Integrated Hot Swap Controller | DFN-16, TSSOP-20 | |
| LTC4218 | 1 | 2.9V to 26.5V | 15mV | 5 | yes | Hot Swap Controller | SSOP-16,DFN-16 | |
| LTC4219 | 1 | 2.9 to 15 (5V or 12V presets) | 5.6A | 10 | yes | 5A Integrated Hot Swap Controller | DFN-16 | |
| LTC4221 | 2 | (1) 1 to 13.5 (1) 2.7 to 13.5 | 25mV | 18 | yes | Dual Hot Swap Controller/Power Sequencer with Dual Speed, Dual Level Fault Protection | SSOP-16 | |
| LTC4222 | 2 | 2.9V to 29V | 50mV | 5 | yes | 10-bit | Dual Hot Swap Controller with I2C Compatible Monitoring | QFN-32, SSOP-36 |
| LTC4223 | 2 | 12, 3.3 aux | 50mV (12), 240mA (3.3 aux) | 5 | yes | Dual Supply Hot Swap Controller for Advanced Mezzanine Card | SSOP-16, DFN-16 | |
| LTC4224 | 2 | 1V to 6V | 50mV | 10 | yes | Compact Dual Low Voltage Hot Swap Controller | MS-10, DFN-10 | |
| LTC4225 | 2 | 2.9V to 18V | 50mV | 5 | yes | Dual Ideal Diode and Hot Swap Controller, Latch Off After Fault | QFN-24, SSOP-24 | |
| LTC4225 | 2 | 2.9V to 18V | 50mV | 5 | yes | Dual Ideal Diode and Hot Swap Controller, Retry After Fault | QFN-24, SSOP-24 | |
| LTC4226 | 2 | 4.5V to 44V | 50mV | 10 | yes | - | Wide Operating Range Dual Hot Swap Controller | QFN-16, MS-16 |
| LTC4227 | 1 | 2.9V to 18V | 50mV | 5 | yes | Dual Ideal Diode and Single Hot Swap Controller, Latch Off After Fault | QFN-20, SSOP-16 | |
| LTC4227 | 1 | 2.9V to 18V | 50mV | 5 | yes | Dual Ideal Diode and Single Hot Swap Controller, Automatic Retry After Fault | QFN-20, SSOP-16 | |
| LTC4228 | 2 | 2.9V to 18V | 50mV | 5 | yes | Dual Ideal Diode and Hot Swap Controller, Latch Off After Fault | QFN-28, SSOP-28 | |
| LTC4228 | 2 | 2.9V to 18V | 50mV | 5 | yes | Dual Ideal Diode and Hot Swap Controller, Retry After Fault | QFN-28, SSOP-28 | |
| LTC4230 | 3 | (1) 2.7 to 16.5, (1) 2.375 to 16.5, (1) 1.7 to 15.5 | 50mV | 20 | no | Controls three supplies. active current limiting on in-rush, timed circuit breaker or fast response to catastrophic faults | SSOP-20 | |
| LTC4232 | 1 | 2.9V to 15V | 10 | yes | 5A Integrated Hot Swap Controller | DFN-16 | ||
| LTC4240 | 4 | 3.3, 5, 卤12 | 55mV | 9 | yes | Controls 3.3V,5V with N-Channel FETs, 卤12V supplies controlled with internal switches. I2C compatible interface | SSOP-28 | |
| LTC4241 | 5 | 3.3, 5, 卤12, 3.3 aux | 55mV (3.3,5), 850mA (12), 450mA (-12) | 27 | yes | Controls 3.3V,5V, and 3.3V Aux with N-Channel FETs, 卤12V supplies controlled with internal switches. Active high On for PCI | SSOP-20 | |
| LTC4242 | 6 | 3.3, 12, 3.3 aux | 50mV (3.3,12), 550mA (3.3 aux) | 10 | yes | Dual Slot Hot Swap Controller for PCI Express | QFN-38, SSOP-36 | |
| LTC4244 | 4 | 3.3, 5, 卤12 | 52mV | 14 | yes | Rugged, CompactPCI Bus Hot Swap Controllers | SSOP-20 | |
| LTC4244 | 4 | 3.3, 5, 卤12 | 52mV | 14 | yes | Rugged, CompactPCI Bus Hot Swap Controllers, Designed for Applications without 鈥?2V | SSOP-20 | |
| LTC4245 | 4 | 3.3, 5, 卤12 or 3.3, 12, 3.3 aux | 25mV (3.3,5), 50mV (卤12) | 10 | yes | Multiple Supply Hot Swap Controller with I2C Compatible Monitoring | SSOP-36, QFN-38 | |
| LTC4251B | 1 | -15 Min (floating) | 50mV | 20 | yes | - | Negative Voltage Hot Swap Controllers in SOT-23, standard telecom operating range of 鈥?43V to 鈥?5V | SOT-23 |
| LTC4251B | 1 | -15 Min (floating) | 50mV | 20 | yes | - | Negative Voltage Hot Swap Controllers in SOT-23, UV/OV thresholds extend the operating range to encompass 鈥?6V to 鈥?2V | SOT-23 |
| LTC4251B | 1 | -15 Min (floating) | 50mV | 20 | yes | - | Negative Voltage Hot Swap Controllers in SOT-23, implements a UV threshold of 鈥?3V only2V | SOT-23 |
| LTC4252B_C | 1 | -15 Min (floating) | 50mV | 20 | yes | - | Negative Voltage Hot Swap Controllers, Latch Off After Fault | MS-8, MS-10 |
| LTC4252B_C | 1 | -15 Min (floating) | 50mV | 20 | yes | - | Negative Voltage Hot Swap Controllers, Automatic Retry After Fault | MS-8, MS-10 |
| LTC4252B_C | 1 | -15 Min (floating) | 50mV | 10 | yes | - | Negative Voltage Hot Swap Controllers, Latch Off After Fault | MS-8, MS-10 |
| LTC4252B_C | 1 | -15 Min (floating) | 50mV | 10 | yes | - | Negative Voltage Hot Swap Controllers, Automatic Retry After Fault | MS-8, MS-10 |
| LTC4253B | 1 | -15 Min (floating) | 50mV | 20 | yes | - | -48V Hot Swap Controller with Sequencer | SSOP-16 |
| LTC4260 | 1 | 8.5V to 80V | 50mV | 10 | yes | 8-bit | Positive High Voltage Hot Swap Controller with I虏C Compatible Monitoring | SO-24, SSOP-24, QFN-32 |
| LTC4261 | 1 | -12V to -100V | 50mV | 10 | yes | 10-bit | Negative Voltage Hot Swap Controller with ADC and I2C Monitoring, Latch-Off | SSOP-28, QFN-24 |
| LTC4261 | 1 | -12V to -100V | 50mV | 10 | yes | 10-bit | Negative Voltage Hot Swap Controller with ADC and I2C Monitoring, Retry | SSOP-28, QFN-24 |
| LTC4280 | 1 | 2.9V to 15V | 25mV | 10 | yes | 8-bit | Hot Swap Controller with I2C Compatible Monitoring | QFN-24 |
| LTC4360 | 1 | 2.5V to 5.5V | no | Overvoltage/Overcurrent Protection Controller, Low Current Shutdown | SC-70 | |||
| LTC4360 | 1 | 2.5V to 5.5V | no | Overvoltage/Overcurrent Protection Controller, Reverse Voltage Protection | SC-70 | |||
| LTC4361 | 1 | 2.5V to 5.5V | 50mV | 10 | no | Overvoltage/Overcurrent Protection Controller, Latchoff after Fault | SOT-23, DFN-8 | |
| LTC4361 | 1 | 2.5V to 5.5V | 50mV | 10 | no | Overvoltage/Overcurrent Protection Controller, Auto Retry after Fault | SOT-23, DFN-8 | |
| LTC4362 | 1 | 2.5V to 5.5V | 1.5A | 20 | no | 1.2A Overvoltage/Overcurrent Protector, Latchoff after Fault | DFN-8 | |
| LTC4362 | 1 | 2.5V to 5.5V | 1.5A | 20 | no | 1.2A Overvoltage/Overcurrent Protector, Auto Retry after Fault | DFN-8 | |
| LTC4364 | 1 | 4V to 80V | 50mV | 10 | - | Surge Stopper with Ideal Diode | DFN-14, MS-16, SO-16 | |
| LTC4364 | 1 | 4V to 80V | 50mV | 10 | - | Surge Stopper with Ideal Diode, 0.1% Retry Duty Cycle During Faults | DFN-14, MS-16, SO-16 | |
| LTC4365 | 1 | 2.5V to 34V | no | - | Controls Dual N-Channel MOSFET, Fault Status Pin | DFN-8, SOT-23 | ||
| LTC4366 | 1 | 9V to Over 500V | - | High Voltage Surge Stopper, Latch Off | SOT-23, DFN-8 | |||
| LTC4366 | 1 | 9V to Over 500V | - | High Voltage Surge Stopper, Auto Retry | SOT-23, DFN-8 | |||
